Icom IC-F9011 User Manual page 43

Receiving (Reviving the transceiver)
A Radio uninhibit signal revives the inhibited
transceiver.
1When an inhibited transceiver receives a radio
uninhibit signal, the Busy/Transmit indicator does
not light because the Radio Inhibit is still activated.
2An acknowledgement is automatically transmitted 2An acknowledgement is automatically transmitted,
and the transceiver is revived and returns to
normal operation.
• The Busy/Transmit indicator lights red.
▒ NOTE: If the transceiver is not revived even, after a
▒ radio uninhibit signal is received, cloning is
▒ ▒ required to revive it.
■ Remote Monitor function
Transmitting
A Remote Monitor function allows you to send a
signal that requires the target station to transmit
audio from the microphone. p
[Digital Button] key assignment is necessary to
transmit the remote monitor signal.
(Not available on Non-display model)
1Push [Digital Button] to enter the digital call type
selection mode.
2Push [CH Up] or [CH Down], or rotate [CH
Up/Down] to select "RDO MONITOR."
APCO P25 Mode Operation
3Push [Digital Button] again to enter the Individual
ID selection mode.
• A pre-programmed ID name is displayed.
• When the ID name is not programmed,
the ID code is displayed.
4Push [CH Up] or [CH Down], or rotate
[CH Up/Down] to select the desired ID (or name).
• Push and hold [Digital Button] for 1 sec to
cancel and return to normal operation cancel and return to normal operation.
• The ID can be edited with the 10-keypad*.
(Depending on the pre-set value.)
*10-key model only.
5Push [PTT] to transmit the remote monitor signal
to the target station.
• The Busy/Transmit indicator lights red.
• "PLEASE WAIT" is displayed.
6Release [PTT].
• "ACK RECEIVED" is displayed after receiving an
acknowledgement from the target station, and
then the transceiver returns to normal operation.
• Busy indicator lights green.
• "NO ACKNOWLDG" is displayed when an
acknowledgement is not received, and then the
transceiver returns to normal operation.
Receiving
➥ When a remote monitor signal is received, the
transceiver automatically transmits an
acknowledgement and audio*.
*The audio is transmitted for a pre-set time
period.
•The Busy/Transmit indicator lights green while Th B
receiving, and lights red while transmitting an
acknowledgement or the audio.
✔ For Mobile transceivers operation:
When the optional SM-25 desktop microphone,
HM-152T or HM-148T hand microphone is
connected, the audio will not be transmitted.
p y
/T it i di t light g hil
43