Apco P25 Conventional & Trunking - Basic Functions; Tactical Group Function - Icom IC-F9011 User Manual

■ Tactical Group function

The Tactical Group function enables commonly
used channels to be placed together in zone 128.
▒ IMPORTANT!
▒ The tactical group operation should be enabled
▒ by your dealer with the CS-F9010/F9510
▒ cloning software. Ask your dealer for details.
▒ Non-display model can be operated only as the
▒ sub transceiver.
Creating the tactical group in zone 128
— Individual channel copy
1Push [CH Up] or [CH Down], or rotate
[CH Up/Down] to select the channel which you
wish to copy to zone 128, then turn power OFF. py
2While pushing [I] and [III], rotate [VOL] to turn
power ON.
• "COPY ?" is displayed.
• When all 512 channels are already used, the
transceiver has no capacity. "NOT COPY" is
displayed for 2 sec and error beeps sound.
• Turn power OFF to cancel copy.
3Push [ 3Push [ ] to copy the selected channel to zone ] to copy the selected channel to zone
128.
• "COPIED" is displayed.
Creating the tactical group in zone 128
— Zone copy
1Push [CH Up] or [CH Down], or rotate
[CH Up/Down] to select the channel belonging
to the zone which you wish to copy to zone 128,
then turn power OFF.
2 While pushing [I] and [III], rotate [VOL] to turn
power ON.
• "COPY ?" is displayed.
• When all 512 channels are already used, the
transceiver has no remaining capacity. "NOT
COPY" is displayed for 2 sec and error beeps are
emitted. emitted
• Turn power OFF to cancel copy.
3Push [CH Up] or [CH Down], or rotate
[CH Up/Down] to select "ZONE COPY ?".
4Push [ ] to copy the selected zone data to
zone 128.
• "COPIED" is displayed.
▒ NOTE: ▒
▒ When the transceiver does not have enough
▒ capacity to create the tactical group with zone
▒ copy, all channel data may not be copied
▒ completely.
52
4-1-8 Tactical Group Function
p
, p
y py
Clearing the tactical group in zone 128
— Individual channel clearing I di id l h
1Push [CH Up] or [CH Down], or rotate
[CH Up/Down] to select the channel which you
wish to clear from zone 128, then turn power
OFF.
2 While pushing [I] and [III], rotate [VOL] to turn
power ON.
• "CLEAR ?" is displayed • CLEAR ? is displayed.
• Turn power OFF to cancel clearing.
3Push [ ] to clear the selected channel from
zone 128.
• "CLEARED" is displayed.
Clearing the tactical group in zone 128
— Zone clearing
1Push [CH Up] or [CH Down], or rotate 1Push [CH Up] or [CH Down], or rotate
[CH Up/Down] to select a channel in zone 128,
then turn power OFF.
2While pushing [I] and [III], rotate [VOL] to turn
power ON.
• "CLEAR ?" is displayed.
• Turn power OFF to cancel clearing.
3Push [CH Up] or [CH Down], or rotate
[CH Up/Down] to select "ALL CLEAR ?" [CH Up/Down] to select ALL CLEAR ? .
4Push [ ] to clear the zone data from zone 128.
• "ALL CLEARED" is displayed.
Cloning the tactical group
<Master (Zone 128) ➔ Sub (Zone 128)>
This operation enables the master transceiver to
clone its own tactical group in zone 128 to zone
,
128 of the sub transceiver. 128 of the sub transceiver.
▒ IMPORTANT!
▒ To perform the tactical group cloning, "Set
▒ mode access" must be enabled, and the dealer
▒ pass code must be entered.
1Connect the two transceivers (master and sub)
with the optional zone copy cable. The
following zone copy cables are available; following zone copy cables are available;
• OPC-1870 : Used for the Handheld to
Handheld connection.
• OPC-1871 : Used for the Handheld to Mobile
connection.
l l i