Optional Internal Unit Installation - Icom IC-F9011 User Manual

Unit Installation
The optional units add useful features to the
IC-F9011 series. The optional units available with
the IC-F9011 series are as follows. (See
Accessories.)
▪ UT-124R Man Down Unit
▪ UT-125 AES/DES Encryption Unit
▪ UT-128 DES Encryption Unit
▒ CAUTION! Optional unit installation should be done
▒ at an authorized Icom service center only.
▒ The waterproof capability of the transceiver cannot
▒ be guaranteed if you install an unit yourself, or
▒ have it done at a non authorized dealer/service ▒ have it done at a non-authorized dealer/service
▒ center.
1Remove total of 2 knobs.
VOL knob
2Remove the antenna nut.
3Unscrew 4 screws from the rear panel.
Antenna
nut nut
CHASSIS CHASSIS
Front
panel
22
3-3-6

Optional Internal Unit Installation

3-2 Optional
Top knob with Outer
knob
(Outer knob)
Front panel
Screw x 4
4Turn the rear panel as below. No need to detach
the flexible cables
5 Attach the unit as below.
J402 Slot for
UT-124R
6Recover the transceiver, and set or modify the
setting using optional cloning software.
J601 Slot for
UT-125/UT-128