Layout Settings - Xerox WorkCentre 7970 User Manual

Layout Settings

This section includes:
• Specifying the Orientation of the Original ........................................................................................................... 115
• Specifying the Size of the Original .......................................................................................................................... 115
• Selecting Book Copying ............................................................................................................................................... 116
• Shifting the Image ........................................................................................................................................................ 116
• Erasing the Edges of Copies ....................................................................................................................................... 117
• Inverting the Image ...................................................................................................................................................... 117
Specifying the Orientation of the Original
If you plan to have the copies automatically stapled, specify the orientation of the original.
1. Press the Services Home button, then touch Copy.
Touch the Layout Adjustment tab, then touch Original Orientation.
2.
3. On the Original Orientation screen, touch the desired orientation:
− Portrait Originals and Landscape Originals refer to the images on the originals.
Upright Images and Sideways Images refer to the direction the originals are loaded in the
−
document feeder.
Note: If you are using the document glass, the orientation of the original is as seen before turning it
over.
4. Touch OK.
Specifying the Size of the Original
To scan the correct area of the original, specify the original size.
Press the Services Home button, then touch Copy.
1.
Touch the Layout Adjustment tab, then touch Original Size.
2.
3. On the Original Size screen, select an option:
Auto Detect: This options allows the printer to determine the size of the original.
−
Preset Scan Areas specifies the area to scan when it matches a standard paper size. In the
−
scrolling list, touch the desired paper size.
− Custom Scan Area allows you to specify the height and width of the area to scan. To specify an
area, touch the Length (Y) and Width (X) arrows.
− Mixed Size Originals allows you to scan standard-size originals of varying sizes. Use the
diagram on the screen to determine which original sizes can be mixed in the same job.
Touch OK.
4.
® ®
Xerox WorkCentre 7970 Multifunction Printer
Copying
115
User Guide