Xerox WorkCentre 7970 User Manual page 100

Printing
To print the job now and also save the job, select the Print and Save check box.
4.
5. To store your job at the printer, select Private.
6. In the Passcode field, type a passcode. The passcode is associated with your user name. After you set
a passcode, it becomes the default passcode for any print job that requires a passcode on all Xerox
printers. You can reset the passcode at any time from any window that contains the passcode.
7. In the Confirm Passcode field, type the passcode again.
Click OK.
8.
9. Verify that the paper is the correct size, type, and weight. If not, change the paper settings.
Note: To select the paper for your print job, click Paper>Select By Tray.
10. Select an option for 2-sided printing.
11. If your printer has a finisher installed, click the arrow to the right of Finishing, then select a stapling
option. The image next to Stapling shows the staple position.
12. Select a print-quality mode.
13. Select an output destination.
14. Select another tab or click OK.
15. To print the job, select it from the job list on the printer control panel.
16. Press OK.
After the job is saved, you can print it as needed. For details, see
102.
®
100 Xerox WorkCentre
User Guide
®
7970 Multifunction Printer
Printing from Saved Jobs
®
on page