Xerox WorkCentre 7970 User Manual page 40

Installation and Setup
3. Close the front door.
4. Turn on the secondary power switch.
Note: When the optional Business Ready finisher is installed, the secondary power switch is behind a
clear plastic door.
Secondary Power Switch
To connect a cable:
1. Ensure that there are no jobs in the queue.
2. Turn off the secondary power switch, then wait 10 seconds after the touch screen goes dark before
you proceed.
Note: When the optional Business Ready finisher is installed, the secondary power switch is behind a
clear plastic door.
3. Open the front door.
4. Turn off the main power switch.
5. Close the front door.
To turn off the printer:
1. Ensure that there are no jobs in the queue.
2. Turn off the secondary power switch, then wait 10 seconds after the touch screen goes dark before
you proceed.
Note: When the optional Business Ready finisher is installed, the secondary power switch is behind a
clear plastic door.
3. Open the front door.
4. Turn off the main power switch.
5. Close the front door.
®
40 Xerox WorkCentre
User Guide
®
7970 Multifunction Printer
Secondary Power Switch with BR Finisher