Receiving A Message - Icom IC-F5060 series Operating Manual

2
BIIS 1200 OPERATION

■ Receiving a message

D Receiving a status message
q When a status message s receved;
• Beeps sound.
• The status message and the callng staton ID (or text) s ds-
played when the ndcaton mode s 2 lnes as below.
• The status message and the callng staton ID (or text) s ds-
played alternately when the ndcaton mode s 1 lne, depend-
ng on the settng.
R X
w Push [Moni (Audi)] to return to stand-by operaton.
NOTE: When the indication mode is 1 line
Only the callng staton ID (or text) s dsplayed (no mes-
sage s dsplayed alternately) when the scroll tmer s set
to 'OFF.' In ths case, push [Status Up]/[Status Down] to
dsplay the status message manually.
7
S t a t u s 0 1
1 2 3 4
D Receiving an SDM (Short Data Message)
q When an SDM s receved;
• Beeps sound.
• " " appears.
• The SDM and the callng staton ID (or text) s dsplayed when
the ndcaton mode s 2 lnes as below.
• The SDM and the callng staton ID (or text) s dsplayed alter-
nately when the ndcaton mode s 1 lne, dependng on the
settng.
S D M 8
NOTE: When the receved SDM ncludes more than
12 characters, the message scrolls automatcally,
when the automatc scroll functon s actvated.
• Push [Status Up]/[Status Down] to scroll the message man-
ually.
S D M 1 2 3 4 5 6 7 8
w Push [Moni (Audi)] to return to stand-by operaton.
Appears
1 2 3 4
Appears
1 2 3 4