Status Message TransmSsOn; Horn Output; PrNter ConnectOn; EncryptOn FunctOn - Icom IC-F5060 series Operating Manual

5

IDAS OPERATION

■ Status message transmission
The status message can be transmtted automatcally.
The status message s transmtted when;
• The transcever s turned ON or OFF
- Set the status message to be transmtted n 'Power ON Status'
or 'Power OFF Status' tem, respectvely.
- Set the target staton ID n 'Power Status ID'.
• After sendng a voce message
- Set the 'Send wth Voce Call' tem as 'Enable.'
- Set the status message to be transmtted n 'Send Status Num-
ber' tem.

■ Horn output

Automatc honkng functon s avalable when the horn honk
equpment s connected to D-Sub 25-pn of the transcever.
When a status message s receved, the transcever controls
the vehcle's horn for the specfied tme perod to nform a
status message s receved.
Ths functon s convenent when the operator away from the
transcever.
Ask your dealer or system operator, or refer to the IC-F5061/
F6061 seres servce manual for connecton and settng de-
tals.
43
■ Printer connection
When the prnter s connected to the D-sub 25-pn of the
transcever, the receved SDM content and the called staton
ID can be prnted out.
Ask your dealer or system operator for connecton detals.
■ Encryption function
The encrypton functon enables voce scramblng, whch pro-
vdes prvate dgtal communcaton between statons.
q Push [Scrambler/Encryption] to turn the encrypton func-
ton ON.
• " " appears.
w Push [Scrambler/Encryption] agan to turn the encryp-
ton functon OFF.
• " " dsappears.