Stun FunctOn; Biis NdCatOn; PrOrTy A Channel SelectOn - Icom IC-F5060 series Operating Manual

2
BIIS 1200 OPERATION
■ Stun function
When the specfied ID, set as a kller ID, s receved, the stun
functon s actvated.
When the kller ID s receved, the transcever swtches to
the password requred condton. Enterng of the password
va the keypad s necessary to operate the transcever agan
n ths case.
■ BIIS indication
The followng ndcatons are avalable for the BIIS operaton
on an MSK channel.
CONNECT : Indvdual/group call s successful.
: Message (status or SDM) transmsson s suc-
OK
cessful.
: No answer back s receved.
FAILED
: Appears durng retry of the call (2nd call).
WAIT
CLR DOWN : End the communcaton.
: Operatng channel s n the busy condton.
BUSY
13
■ Priority A channel selection
When one of the followng operatons s performed, the
transcever selects the Prorty A channel automatcally.
Prorty A s selected when;
• Clear down sgnal s receved/transmtted
- Set the 'Clear down' tem as 'Enable' n 'Move to ProA CH.'
• Turnng the power ON
The Prorty A channel s selected each tme the trans-
cever power s turned ON.
• Status call
The Prorty A channel s selected when transmttng a
status call.
- Enable the 'Send Status on ProA CH' tem n the MSK
configuraton.