Icom IC-F5060 series Operating Manual page 40

5
IDAS OPERATION
D Transmitting a Status Message
The transcever has the ablty to send a pre-programmed
status message.
There are 100 status messages that can be sent.
q Push [Digital Button] to enter the applcaton selecton
mode.
• "VOICE" appears.
• To change the call type, push and hold [Digital Button] for 1 sec.
durng stand-by operaton. After changng, the transcever enters
the applcaton selecton mode automatcally.
w Push [CH Up] or [CH Down] to select "STATUS."
e Push [Digital Button] agan to enter the status message
selecton mode.
• The pre-programmed status message s dsplayed.
r Push [CH Up] or [CH Down] to select the desred mes-
sage.
S T A T U S
T X
Pre-programmed status message is displayed.
t Push [Digital Button] agan to enter the Indvdual or Talk-
group ID selecton mode.
• The pre-programmed ID name s dsplayed.
• When ID name s not programmed, ID code s dsplayed.
• The prmarly ID can be pre-set to dsplay frst.
Ths functon s usable n transcevers whose revson number s
2.9 or later. Ask your dealer for detals.
37
S T A T U S 0 1
y Push [CH Up] or [CH Down] to select the desred ID name
(or ID code).
• Dependng on the pre-settng, you can nput the ID drectly. (The
optonal HM-152T s requred.) See p. 41 for detals.
S T A T U S
S T A T I O N
Individual or Talkgroup ID name is displayed.
u Push [PTT] to transmt the status message to the selected
staton or talkgroup.
• "STAT TX" s dsplayed.
i Release [PTT].
• "STAT OK" s dsplayed after recevng an acknowledgement
from the base staton.
• "STA FAIL" s dsplayed f there s no acknowledgment from the
base staton.
o After a specfied tme perod has passed, the transcever
wll return to receve.
Convenient! (The optonal HM-152T s requred.)
Dependng on the pre-settng, you can use the quck status
message selecton/transmsson.
➥ Push the desred dgt key ([1] to [9] or [0]) to enter the
status message selecton mode.
• The approprate status message s dsplayed.
➥ Push and hold the desred dgt key ([1] to [9] or [0]) for
1 sec. to transmt the approprate status message 1 to 10.
1