Icom IC-F5060 series Operating Manual page 43

D Transmitting a Status Polling Call
The transcever can send a sgnal that causes the targeted
staton to automatcally transmt ts current status.
q Push [Digital Button] to enter the applcaton selecton
mode.
• "VOICE" appears.
• To change the call type, push and hold [Digital Button] for 1 sec.
durng stand-by operaton. After changng, the transcever enters
the applcaton selecton mode automatcally.
w Push [CH Up] or [CH Down] to select "STAT POL".
e Push [Digital Button] agan to enter the Indvdual ID se-
lecton mode.
• The pre-programmed ID name s dsplayed.
• When ID name s not programmed, ID code s dsplayed.
• The prmarly ID can be pre-set to dsplay frst.
Ths functon s usable n transcevers whose revson number s
2.9 or later. Ask your dealer for detals.
r Push [CH Up] or [CH Down] to select the desred ID name
(or ID code).
• Dependng on the pre-settng, you can nput the ID drectly. (The
optonal HM-152T s requred.) See p. 41 for detals.
S T A T P O L
S T A T I O N
Individual ID name is displayed.
1
t Push [PTT] to transmt the status pollng to the selected
staton.
• "STAT POL" s dsplayed.
y Release [PTT].
• The status message s dsplayed when the targeted staton send
the status.
• "POL FAIL" s dsplayed f there s no acknowledgment from the
staton.
u After a specfied tme perod has passed, the transcever
wll return to receve.
5
IDAS OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
40