Icom IC-F5060 series Operating Manual page 30

5
IDAS OPERATION
D Receiving a Stun, Kill or Revive
If an ndvdual call wth Stun or Kll command s receved
(RAN code matchng s not necessary dependng on the pre-
settng), the transcever wll dsplay "SORRY" and you can not
receve or transmt.
*
* Dependng on the receved Stun command settng.
➥ When a Stun command s receved;
• The transcever cannot be operated untl the ndvdual call wth
Revve command s receved (RAN code matchng s not neces-
sary dependng on the pre-settng) or nput a password.
➥ When a Kll command s receved;
• The transcever cannot be operated untl the data clonng s per-
formed. Ask your dealer for detals.
NOTE: Dependng on the pre-settng, the transcever g-
nores the Stun, Revve and Kll commands, whch are from
a non-specfied staton.
Ths functon s usable n transcevers whose revson num-
ber s 2.9 or later. Ask your dealer for detals.
27
D Receiving a Remote Monitor, Radio Check
or Status Polling Call
If an ndvdual call wth Remote montor, Rado check or Sta-
tus pollng command s receved (RAN code matchng s not
necessary dependng on the pre-settng), the transcever wll
transmt automatcally.
➥ When a Remote montor command s receved;
• The mcrophone audo s automatcally transmtted for the set
tme perod.
➥ When a Rado check command s receved;
• The transcever automatcally transmt the acknowledgement
call.
➥ When a Status pollng command s receved;
• The transcever automatcally transmt the status call.