Clerk Sign-On/Sign-Off; Direct Sign-On - Sam4s ER-920 Operator's And Programming Manual

Clerk Sign-On/Sign-Off

See "System Option Programming" to review your clerk options: (System option #2 allows
you to select direct or code entry sign on, option #3 allows you to select stay-down or pop-up
operation, and option #26 allows you select clerk interrupt operations.)
Depending on how your register has been programmed, sign-on will take place only at the
beginning of a shift (stay-down), or may have to be repeated for each transaction (pop-up).
Normally, if your register has been programmed for stay-down clerks, the clerk currently
signed on must be signed off before another clerk may be signed on. If you have selected the
clerk interrupt option, a new clerk can be signed on in the middle of a transaction. In this
circumstance, the initial transaction is suspended. When the interrupt transaction is
completed, the suspended transaction can be continued.
Check with your store manager to see which options have been selected for your register.
Before any transaction may take place, a clerk must be signed on. Clerk sign-on is
accomplished in one of two ways:

Direct Sign-On

If the direct sign-on method is selected, enter
the clerk number and press the clerk key.
To sign the clerk off, enter 0 (Zero) and press
the clerk key.
40 • Operations
CLERK
Clerk # (1-10)
0 CLERK
SAM4s ER-900 Series Operator's & Programming Manual v.1.28
DATE 06/14/2011 SUN
================================
CLERK LOG IN
================================
CLERK 1
CLERK LOG IN TIME
CLERK 1 000001
DATE 06/14/2011 SUN
================================
CLERK LOG OUT
================================
CLERK 1
CLERK LOG OUT
CLERK 1 000001
TIME 08:37
01
09:06
00001
TIME 08:37
01
09:06
00001