Sam4s ER-920 Operator's And Programming Manual page 143

#
26
29
30
31
SAM4s ER-900 Series Operator's & Programming Manual v.1.28
Option
Table Management, or
Clerk Interrupt
Modifier is:
Pop-up after item?
Pop-up after sale?
Store Name
Program descriptors with overlay/
Description
Clerk Interrupt allows you to temporarily
suspend an incomplete transaction by
signing on a new clerk. The new clerk
can begin a new transaction with the first
transaction temporarily suspended. The
original transaction can be recalled for
completion by signing on the original
clerk. You cannot use check/table
tracking or charge posting when the clerk
interrupt system is implemented.
Using the clerk interrupt feature requires
allocation of at least 2 guest checks and
sufficient soft check lines to support the
interrupted transaction (i.e. if 20 soft
check lines are allocated, a transaction
with up to 20 lines can be interrupted.)
A MODIFIER key alters the next PLU
registered, either by changing the code
number of the PLU so that a different
item is registered, or by adding the
Stay-down?
modifier descriptor and not changing the
code of the subsequent PLU. If you
press a modifier key, you have the option
of the modifier applying only to the next
item (0), having the same modifier apply
to any subsequent item registered in the
same transaction (1), or having the same
modifier apply to any subsequent item on
any subsequent transaction (2).
This is an 8-character alpha/numeric
field. Entry is made by alpha overlay or
descriptor code, depending upon the
method selected. You must set a store
name when using an SD card to
save/load programs or reports. The name
set here must match the name of the
folder on the SD card, for example:
SD:/ER900/PGMBACK/NAME for
program files or
SD:/ER900/RPTBACK/NAME for
report files. Report files can be viewed
using the optional PC Utility. Consult
with your SAM4s dealer for details.
Defaults to Yes for flat keyboard models;
No for raised key models.
P-Mode Programming • 143