Sam4s ER-920 Operator's And Programming Manual page 188

Programming Group Descriptors
188 • P-Mode Programming
1. Turn the control lock to the PGM position.
2. To begin the program, enter 9 1 0, press the SUBTL key.
9 1 0
3. Enter the number (1-99) of the group you wish to program; press the X/TIME
key.
X/TIME
4. If you are programming using an alpha keyboard overlay, type up to 18
descriptors on the overlay and press the SUBTL key. (Note: As you are entering
descriptors only the last 16 descriptors will display.)
Type up to 18
descriptor keys
If you are programming using descriptor codes, enter up to 18 three-character
codes and press the SUBTL key.
Enter up to 18 three-
character codes
5. To program additional groups, repeat from step 3, or press the CASH key to
finalize the program.
CASH
SUBTL
SUBTL
SUBTL
SAM4s ER-900 Series Operator's & Programming Manual v.1.28