Program 90 - Function Key Halo - Sam4s ER-920 Operator's And Programming Manual

Program 90 - Function Key HALO

Use Program 90 to program a high amount lock out (HALO) for a function key. Only
specific keys require this program. For example, you can set a HALO for the CASH,
CHECK or CHARGE keys. Refer to the specific function key programming information in
this chapter to determine when the HALO option is available.
Note: An 8 digit HALO has a maximum entry of $500,000.00.
Program 90 Instructions for %1-%5 Keys
9
Note: If key is amount, enter 5 digit HALO, or 0 for no HALO. If key is percentage
enter the percentage in a five-digit format, without the decimal (XX.XXX). For
example: for 10%, enter 10000; for 5.55%, enter 05550; for 99.999%, enter 99999.
SAM4s ER-900 Series Operator's & Programming Manual v.1.28
1. Turn the control lock to the PGM position.
2. To begin the program, enter 9 0, press the SUBTL key.
9 0 SUBTL
3. Enter a HALO of up to eight digits, (or "0" for no HALO). Press the function
key on the keyboard you wish to program.
Enter 1-8 digit
4. To program additional function keys, repeat from step 2, or press the CASH key
to finalize the program.
CASH
Enter 5 digit rate or
0 SUBTL
amount (see note below)
HALO
Repeat for another
function key
%
FUNCTION
KEY
CASH
P-Mode Programming • 155