Instructions For Currency Conversion Rate - Program 90 - Sam4s ER-920 Operator's And Programming Manual

Instructions for Currency Conversion Rate - Program 90

Currency Exchange Rate Programming Examples
Note: Foreign currency exchange rates may be stated as "foreign currency in dollars",
or "dollars in foreign currency". Use the rate stated in "dollars in foreign currency"
when you are programming this section.
The US dollar (home currency) is worth 1.3720 Canadian dollars (foreign currency).
The US dollar (home currency) is worth 110.24 Japanese Yen (foreign currency).
156 • P-Mode Programming
1. Turn the control lock to the PGM position.
2. To begin the program, enter 9 0, press the SUBTL key.
9 0 SUBTL
3. Enter the exchange rate of up to 7 digits (do not enter the decimal point), and
then enter a number from 0 to 7 to indicate the decimal position. See "Currency
Exchange Rate Programming Examples" below.
Exchange Rate
4. Press the function key on the keyboard you wish to program.
FUNCTION
KEY
5. To program additional function keys, repeat from step 2, or press the CASH key
to finalize the program.
CASH
1 3 7
Exchange Rate
1 1 0
Exchange Rate
2 0 4
Decimal
Position
2 4 2
Decimal
Position
SAM4s ER-900 Series Operator's & Programming Manual v.1.28
Decimal
Position