Program 150 - Plu Group Assignment - Sam4s ER-920 Operator's And Programming Manual

Program 150 - PLU Group Assignment

Each PLU may report to any three of 99 groups. Group totals appear on reports, so that you
can track sales of different types of items. A group can also be used to designate items that
are to print on an optional kitchen printer. The first of the three groups to which a PLU
can be assigned determines kitchen printer routing.
Note: The PLU will report to group "1", if not programmed to report to another group.
128 • P-Mode Programming
1. Turn the control lock to the PGM position.
2. To begin the program, enter 1 5 0, press the SUBTL key.
1 5 0
3. Select the PLU or PLUs you wish to program in one of the following ways:

Press a PLU key on the keyboard or scan the item.
PLU

If sequential PLUs are to receive the same status, press the first PLU key and
then press the last PLU key.
PLU PLU

Enter the number of the PLU (up to 15 digits) and press the PLU key.

Enter the number of the first PLU in a range of PLUs that are to receive the
same setting; press the PLU key. Enter the last number in the range; press
the PLU key.
4. Enter up to three 2-digit numbers representing the groups where you wish to add
the PLUs sales, i.e. enter 1 0 for group 10 or enter 0 4 for group four. Press the
X/TIME key.
st nd
1 Group
2 Group
5. To program additional PLUs, repeat from step 3, or press the CASH key to
finalize the program.
CASH
SUBTL
PLU
PLU
X/TIME
rd
3 Group
SAM4s ER-900 Series Operator's & Programming Manual v.1.28
PLU