Program 90 - Function Key Halo - Sam4s ER-390 Series Operation And Program Manual

Program 90 - Function Key HALO

Use Program 90 to program a high amount lock out (HALO) for a function key. Only specific keys
require this program. For example, you can set a HALO for the CASH, CHECK or CHARGE keys.
Refer to the specific function key programming information in this chapter to determine when the HALO
option is available.
•
124 Program Mode Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 9 0, press the SBTL key.
9 0 SBTL
3. Enter a HALO of up to eight digits, (or "0" for no HALO).
Enter 1-8 digit
HALO
4. Press the function key on the keyboard you wish to program.
FUNCTION
KEY
5. To program additional function keys, repeat from step 2, or press the CASH
key to finalize the program.
CASH
ER-390 Series