Program 150 - Plu Group Assignment Programming - Sam4s ER-430M Operation And Program Manual

Program 150 - PLU Group Assignment Programming

Each PLU may report to any three levels of 20 groups. Group totals appear on reports, so that you can
track sales of different types of items. A group can also be used to designate items that are to print on
an optional kitchen printer.
NOTE: The PLU will report to group "0", if not programmed to report to groups 1-20.
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 1 5 0, press the SBTL key.
1
3. Select the PLU or PLUs you wish to program in one of the following ways:
•
Press a PLU on the keyboard, or
•
Press the first PLU in a range of PLUs that are to receive the same setting then press the
last PLU, or
•
Enter up to 15 digit number of the PLU and press the PLU key, or
Enter the PLU#,
•
Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the PLU key. Enter the last PLU number in the range; press the PLU key,
or
Enter the PLU#,
•
For a barcode item, scan the barcode.
4. Enter up to three 2-digit numbers representing the groups where you wish to add the PLUs
sales, i.e. enter 1 0 for group 10 or enter 0 4 for group four. If a PLU is link to group 03 as
st
1 group only, please enter 0 3 0 0 0 0. Then press the X/TIME key.
st
1 Group
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH
ER430M Electronic Cash Register AU
5 0 SBTL
PLU
PLU PLU
PLU
up to 15 digits
PLU
up to 15 digits
n d
2 Group 3
Enter the PLU#,
up to 15 digits
X/TIME
rd
Group
PLU
Program Mode Programming • 95