Installing The Blade - Roland LEC-300A Setup Manual

7. Installing the Blade

CAUTION
CAUTION
1.
Insert a blade into the blade holder.

Insert the pin.
Leave the pin inserted.
Cap
 Insert the blade.
Blade
2.
Enter the blade replacement mode.

MENU
SUB MENU

SUB MENU
MAINTENANCE

MAINTENANCE
REPLACE KNIFE

NOW PROCESSING..
OPEN FRONT
COVER
Be sure to perform operations as specified by these instructions,
and never touch any area not specified in the instructions.
Sudden movement of the machine may cause injury.
Never touch the tip of the blade with your fingers.
Doing so may result in injury, and the cutting performance of the blade
will be impaired.
Pin
Blade holder
Insert the blade.
Press
Press
Press
Press
Press
Press
Press
The cutting carriage moves to a location permitting blade
replacement, and then the screen shown in the figure appears.
.
several times.
.
.
.
twice.
.
53