Roland LEC-300A Setup Manual page 58

Hide thumbs Also See for LEC-300A:

Table of Contents

8. Network Settings

For Windows 2000:

From the [Start] menu, click [Settings], then click [Network and Dial-up Con-

nections].

Double-click the [Local Area Connections] icon.







Click [Properties].

Click [Allow] when the [User Account Control]

dialog box appears.

The [Local Area Connection Properties] dialog box

appears.

Select [Internet Protocol Version 4 (TCP/

IPv4)] (Windows 7/Vista) or [Internet Proto-

col (TCP/IP) (Windows XP/2000), then click

[Properties].

If the check box for [Internet Protocol] is not selected,

then click the check box to select it.

Select [Use the following IP address]. Enter

the information as shown below, then click

[OK].

[IP Address]: 192.168.0.XXX

[Subnet Mask]: 255.255.255.0

"XXX" may be any number you want from 1 to 254.

However, be sure to specify a number that does not

duplicate a number used for another computer or

device. Here, by way of example, "192.168.0.101" is

entered for the IP address and "255.255.255.0" for the

subnet mask.

Table of Contents

Lec-300