Selecting The Ink Mode - Roland LEC-300A Setup Manual

Selecting the Ink Mode

Be sure to make the selection of the ink mode when switching on the power for the first time.
Procedure

Close the front cover.
 If the main power switch is on, then switch it off.

<ECO-UV gloss/gloss mode>

Hold down

When a message appears on the display screen, release the operation-
panel buttons.
SET INK MODE
GLOSS INK
<ECO-UV white/white mode>

Hold down

When a message appears on the display screen, release the operation-
panel buttons.
SET INK MODE
WHITE INK
<ECO-UV gloss/white mode>

Hold down

When a message appears on the display screen, release the operation-
panel buttons.
SET INK MODE
CMYKGlW
<ECO-UVS ink mode>

Hold down

When a message appears on the display screen, release the operation-
panel buttons.
SET INK MODE
ECO-UVS WW
Continued on the next page
6. Installing the Ink Cartridges (LEC-330)
and ,switch on the main power switch.
and ,switch on the main power switch.
and
and
,switch on the main power switch.
,switch on the main power switch.
47