Step 2: Make The Network Settings On The Printer - Roland LEC-300A Setup Manual


In the [Local Area Connection Properties] dialog box, click [OK], then in the
[Local Area Connection Status] dialog box, click [Close].

Step 2: Make the Network Settings on the Printer

Important
The addresses used in this section are merely example settings. For detailed information about
the settings, consult your network administrator.
1.
Set the IP address.

MENU
SYSTEM INFO.

SYSTEM INFO.
NETWORK

IP ADDRESS
000 . 000 . 000 . 000

IP ADDRESS
192 . 000 . 000 . 000

IP ADDRESS
192 . 000 . 000 . 000

IP ADDRESS
192 . 168 . 000 . 003

NETWORK
IP ADDRESS
Press .
Press several times.
Press .
Press .
Press three times.
[IP ADDRESS] : 192.168.000.XXX
Note: Here, "XXX" may be any number you want from 2 to 254.
However, be sure to specify a number that does not duplicate
the setting you made in Step 1. Here, "192.168.000.003" is en-
tered by way of example. Make the portion that corresponds
to "192.168.000" the same as the setting on the computer.
Use to select the address number.
Press .
 
Repeat and to set all the address numbers.
When you've finished making the setting, press
.
Press .
The screen shown in the figure appears.
8. Network Settings
57