Installing The Ink Cartridges - Roland LEC-300A Setup Manual

Installing the Ink Cartridges

Be sure to follow the on-screen
instructions for insertion and
removal.
 Insert in the direction shown in the figure.
 Insert and remove slowly, one at a time.
 Insert firmly, as far as it will go.
During cleaning, you insert and remove cartridges several times. The on-screen messages indicate
which to insert and remove, and when to insert and remove them. Insert each color ink cartridge into
the slot labeled with the matching color. The SOL INK cleaning cartridges are not differentiated by color.
Insert each color ink cartridge into the slot labeled with the matching color. If you insert wrong
cartridges when filling ink, the condition cannot be restored easily. Contact your authorized
Roland DG Corp. dealer or us, if you filled ink with wrong cartridges inserted.
1.
Make the initial settings.
 Hold down

MENU LANGUAGE
JAPANESE

LENGTH UNIT
mm

TEMP. UNIT
C
Arrow
and press the sub power switch.
Use
Press
Use
mm
you want (for length).
Press
Use
C
you want (for temperature).
Press
6. Installing the Ink Cartridges (LEC-330)
to select the language you want.
.
to select the unit of measurement
.
to select the unit of measurement
.
Slot number
49