Roland LEC-300A Setup Manual page 6

To Ensure Safe Use
Danger of electrical short, shock, electrocution, or fire
WARNING
Connect to an electrical outlet that
complies with this machine's rat-
ings (for voltage, frequency, and
current).
Incorrect voltage or insufficient current
may cause fire or electrical shock.
Ratings
Never use out of doors or in any loca-
tion where exposure to water or high
humidity may occur. Never touch with
wet hands.
Doing so may result in fire or electrical
shock.
Never allow any foreign object to get
inside. Never expose to liquid spills.
Inserting objects such as coins or
matches or allowing beverages to be
spilled into the ventilation ports may re-
sult in fire or electrical shock. If anything
gets inside, immediately disconnect the
power cord and contact your authorized
Roland DG Corp. dealer.
Never place any flammable object
nearby. Never use a combustible
aerosol spray nearby. Never use in
any location where gases can ac-
cumulate.
Combustion or explosion may be a
danger.
4
WARNING
Handle the power cord, plug, and
electrical outlet correctly and with
care. Never use any article that is
damaged.
Using a damaged article may result in
fire or electrical shock.
When using an extension cord or
power strip, use one that adequately
satisfies the machine's ratings (for
voltage, frequency, and current).
Use of multiple electrical loads on a
single electrical outlet or of a lengthy
extension cord may cause fire.
Connect to ground.
This can prevent fire or electrical shock
due to current leakage in the event of
malfunction.
Position so that the power plug is
within immediate reach at all times.
This is to enable quick disconnection
of the power plug in the event of an
emergency. Install the machine next to
an electrical outlet. Also, provide enough
empty space to allow immediate access
to the electrical outlet.
If sparking, smoke, burning odor,
unusual sound, or abnormal opera-
tion occurs, immediately unplug the
power cord. Never use if any compo-
nent is damaged.
Continuing to use the machine may
result in fire, electrical shock, or injury.
Contact your authorized Roland DG
Corp. dealer.