Installing The Blade; Installing A Blade - Roland CJ-540 User Manual

1-6 Installing the Blade

Do not touch the tip of the blade with your fingers.
Doing so may result in injury, and the cutting performance of the blade will be impaired.

Installing a Blade

Insert a blade into the blade holder until it snaps
1
into place with an audible click.
Adjust the amount of blade extension as shown
2
in figure to find the optimal amount of blade for
the target material.
3
Press the [MENU] key and [
the following screen appear on the display.
Press the [ENTER] key to make the following
4
screen appear on the display.
When the screen shown in the figure appears, the printing
carriage simultaneously moves to the left.
Open the front cover, and loosen the screw in
5
the figure.
Chapter 1 - Getting Started
30
The amount of
blade extension
Min. : 0 mm
] key to make
Push-pin
Blade holder
Blade
Max. : 2.5 mm
(0.0984 in.)
FINISHED ?
Screw
(0.00394 in.)
MENU
REPLACE KNIFE