Connecting The Power Cord And The Network Cable - Roland LEC-300A Setup Manual

Connecting the Power Cord and the Network Cable

WARNING
WARNING
WARNING
Connect to electrical outlet that complies with this machine's rat-
ings (for voltage, frequency, and current).
Incorrect voltage or insufficient current may cause fire or electrical
shock.
Connect to ground.
This can prevent fire or electrical shock due to current leakage in the
event of malfunction.
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
Electrical outlet
Power cord
Pass the cables
through here.
4. Connecting the Cables
Ethernet (100Base-TX recommended)
Ethernet cable (Category 5 or higher)
Never insert a telephone cable.
37