Setting Day/Night Illumination - Webasto MultiControl Operating Instructions Manual

Turn the c on tro l k nob in order to choose the
X X
desired "Screen timeout" symbol.
Press th e c o n tro l k nob in order to confirm
X X
selection.
Turn the c on tro l k nob in order to choose
X X
the desired time or "Auto" mode.
Press the c on trol knob in order to confirm
X X
selection.
After selecting „Auto" mode the screen does not switch off during active
heating/ventilation. If no heater is active then while setting "Auto" the screen
switches off after 10 seconds.

4.19 Setting day/night illumination

In the case of the screen illumination you can select between the day and
night illumination. If „Off" option is selected then the general setting of brightness
level is activated with no distinction between the day and night.
3
"Settings" symbol has been selected in the main menu.
Press the c o ntro l k nob.
X X
"Quick start" symbol is shown in the display.
Settings
Screen timeout
Settings
Day/Night
Settings
Settings
Quick start
47