Water Heater; Heating Set-Up; Switching On The Heater By Means Of Quick Start Button - Webasto MultiControl Operating Instructions Manual

Press the c on tro l knob.
X X
Turn the c on tro l k nob clockwise until "Delete
X X
all" message is shown in the display.
Press the c on trol knob in order to confirm
X X
selection.
Press the c on trol knob in order to confirm
X X
selection.
The main menu is shown in the display.
4.6

Water heater

4.7

Heating set-up

4.7.1 Switching on the heater by means of quick start button

"Quick start" function enables heating or ventilation by simply pressing the but-
ton. Operation time can be initially set. Instruction manual and description of the
settings can be found in the chapter "Setting the quick start".
3
Quick start button is programmed for heating.
The stored timers appear in the display.
"OK" is shown in the display.
All programmed timers have been removed.
Timers
Delete all
Timers
Delete all
Timers
27