Webasto MultiControl Operating Instructions Manual page 48

Turn the c ontrol k nob in order to choose
X X
the desired "Day/Night" symbol.
Press the c on tro l knob in order to confirm
X X
selection.
"Off" option is preset.
Turn the c ontrol k nob in order to set the value
X X
for the start of the day, the end of the day, bright-
ness during a day, brightness at night.
Preset time for a day is shown in the display.
Press the c o ntro l knob in order to confirm
X X
selection.
"An hour" for the start of the day flickers in the
display.
Turn the c ontrol k nob in order to choose the
X X
desired start of the day "an hour".
Press the c on tro l knob in order to confirm
X X
selection.
Time of "a minute" for the start of the day
flickers in the display.
Settings
Day/Night
Settings
Day/Night
Settings
Start of
daytime
48