Adjusting The Remaining Operation Time During Functioning - Webasto MultiControl Operating Instructions Manual

Turn the c ontrol knob in order to choose
X X
duration of "a minute".
Press the c o ntrol knob in order to confirm
X X
selection.
Heating symbol and preset remaining operation time
appear in the display.
Quick start button shows green light.

4.7.3 Adjusting the remaining operation time during functioning

3
The heater is in the heating mode.
During use the remaining operation time can be only reduced. One cannot
make any changes from the minimum duration which amounts to 10 minutes.
Increasing the operation time is possible only after performing switching off and
restarting the device earlier.
Turn the c ontrol knob in order to adjust the
X X
desired remaining operation time.
anticlockwise direction one can shorten remaining
operation time.
Press the c o ntrol knob within 5 seconds in
X X
order to confirm selection.
Heating starts functioning.
By means of turning the control knob in
Heating
Duration
29