Adjusting The Remaining Operation Time During Functioning - Webasto MultiControl Operating Instructions Manual

Turn the c ontrol k nob in order to choose the
X X
desired duration of "an hour".
wise direction one can select and activate maximum
duration.
Press the c on tro l knob in order to confirm
X X
selection.
Turn the c ontrol k nob in order to choose
X X
duration of "a minute".
Press the c on tro l knob in order to confirm
X X
selection.
Fan speed and selected duration are shown in the
display.
Quick start button shows blue light.

4.4.3 Adjusting the remaining operation time during functioning

3
The heater is in the ventilating mode.
Turn the c ontrol k nob in order to adjust the
X X
desired remaining operation time.
anticlockwise direction one can shorten remaining
operation time. If the longer remaining operation
time is desired then the longer operation time must
be reset.
By means of turning the control knob in clock-
Ventilation starts functioning.
By means of turning the control knob in
Ventilation
Duration
Ventilation
Duration
20