Adjusting The Remaining Operation Time During Functioning - Webasto MultiControl Operating Instructions Manual

Press the c on trol knob within 5 seconds in
X X
order to confirm selection.
* depending on the installed heater.

4.3.5 Adjusting the remaining operation time during functioning

3
The heater is in the heating mode.
Press the c on trol knob in order go from tem-
X X
perature selection to heating mode selection.
Press the c on trol knob in order go from
X X
heating mode selection to remaining operation
time selection.
Turn the c o ntro l knob in order to adjust remai-
X X
ning operation time.
anticlockwise direction one can shorten remaining
operation time.
If longer remaining operation time is desired then
longer remaining operation time must be reset.
Press the c on trol knob within 5 seconds in
X X
order to confirm selection.
By means of turning the control knob in
17