Displaying The System Information - Webasto MultiControl Operating Instructions Manual

Turn the c ontrol k nob in order to choose the
X X
desired brightness level "night".
Press the c on tro l knob in order to confirm
X X
selection.
display. The selected values have been saved.
Day/night illumination is activated.

4.20 Displaying the system information

There are data in the system information regarding software status and control
element status and the name of the connected heater.
3
"Settings" symbol has been selected in the main menu.
Press the c o ntro l k nob.
X X
Turn the c ontrol k nob in order to choose the
X X
desired "System information" symbol.
"Day/night" brightness level appears in the
"Quick start" symbol is shown in the display.
Settings
Brightness
(Night)
Settings
Day/Night
Settings
Settings
Quick start
Settings
System
information
50