Webasto SmarTemp Control 2.0 Operating Instructions

SmarTemp Control 2.0
Operating Instructions for Webasto Air Heaters
Operation
The Webasto SmarTemp Control 2.0 enables you to quickly and effortlessly operate
Webasto air heaters. It's operated using a single rotary dial around the outside of the unit
to scroll through menu options. Simply click the select button (
Ergonomic
Comfort Dial
Ambient Temperature
Display
Set Temperature
Display
Ambient Temp Sensor
Status Indicator Lights
The Red status indicators (heater "ON") and LCD screen backlight turn off after 30 seconds.
A touch of any button or a turn of the rotary knob will re-activate these lights. If the
"Webasto" button is used to re-activate these lights, an additional press of this button is
necessary to turn the heater off. Note that when the heater is "ON" the display is active.
Temperature Calibration
Based on the installation location of the SmarTemp Control 2.0, multiple factors such as door
openings can affect the SmarTemp Controls ambient temperature reading. If temperature
offset adjustment is needed see "Offset" on rear for further details.
) to make your choice.

On/Off Button
Screw Cap
Smart Indicator LED's
Red for Heat Mode
n
Blue for Vent Mode
n
Blinking Red for
n
Diagnostic Codes
Menu Select Button