Buttons And Control; Back-Function; Status Display - Webasto MultiControl Operating Instructions Manual

3.3

Buttons and control

Button Control and function
Quick start button with status display (backlight)
Control knob (turn/push button) for selection and confirmation of the selected
functions.

3.3.1 Back-function

By means of back-function one can always leave the chosen
menu and go to the previous menu level.
Back
3.4

Status display

Status of the heater is indicated by means of the colour backlight of the quick
start button.
Status
Heating mode
Ventilation mode
Switched off heater-control element is activated
Error-no heating mode
Preprogrammed heating mode- control element in stand-by
mode*
Preprogrammed ventilation mode- control element in
stand-by mode*
* If a user does not make any entry by means of the control element for 60
seconds and the heater is switched off then the control element will go into the
stand-by mode (display and LED are switched off).
LED backlight
GREEN permanent
BLUE permanent
WHITE permanent
RED flashing
GREEN flashing
WHITE flashing
11