Timer Programming; Creation And Activation Of Timers - Webasto MultiControl Operating Instructions Manual

4.5

Timer programming

This function is available for control element of MultiControl.
There is a possibility of programming the time settings 7 days in advance. The
heater switches on automatically at the programmed time. There is a possibility
of saving up to 3 time settings per day and altogether up to 21 time settings.
Depending on the used variant of MultiControl device and application case
(e.g. in a car, in a truck, on the boat, etc.), the number of actively available timers
can fluctuate. There are maximum 21 active timers available.

4.5.1 Creation and activation of timers

3
Time and current day of week are set.
3
The heater is switched off.
3
"Timer" symbol has been selected in the main menu.
Press the c on trol knob.
X X
saved yet) appears in the display.
Press the c on trol knob in order to add new
X X
timer.
Turn the c on tro l k nob in order to choose
X X
"Day".
Press the c o ntro l k nob in order to confirm
X X
selection.
"Add timer" message (in no timer has been
Timers
Timers
Add timer
Timers
Day
22