Switching On The Heater Through Heating Menu - Webasto MultiControl Operating Instructions Manual

In delivery condition this function is preset with the standard values.
3
Quick start button is programmed for heating.
Press qu ic k start but ton .
X X
Heating symbol is shown in the display as well as
initially set heating temperature.
Quick start button shows green light.

4.3.2 Switching on the heater through heating menu

3
Heating symbol has been selected in the main menu.
Press the c o ntrol knob.
X X
one heating mode is available then this menu item is
not displayed.
Turn the c ontrol knob in order to choose the
X X
desired heating mode.
Press the c o ntrol knob in order to confirm
X X
selection.
Heating starts functioning.
Heating mode is shown in the display. If only
Heating temperature is shown in the display.
Heating
Heating
Normal
Heating
Heating
Temperature
15