Displaying Stored Error Information - Webasto MultiControl Operating Instructions Manual

Press the c on tro l knob in order to confirm
X X
selection.
Turn the c ontrol k nob in order to switch
X X
between the names of the heater and information
regarding control element (the name of the con-
trol element, status of software and equipment).

4.21 Displaying stored error information

If heaters and other connected components show malfunctioning then such
error information codes) is saved and displayed here. Current error information is
additionally marked with "!" symbol.
When an error occurs, error information must be confirmed by pressing the con-
trol knob. The main menu is displayed once again only after confirmation.
3
"Settings" symbol has been selected in the main menu.
Press the c on tro l knob.
X X
The heater name is shown in the display.
"Quick start" symbol is shown in the display.
Settings
Heater
Settings
Settings
Settings
Quick start
51