Performing Reset - Webasto MultiControl Operating Instructions Manual

Turn the c ontrol k nob in order to choose the
X X
desired "Error information" symbol.
Press the c on tro l knob in order to confirm
X X
selection.
If there is no error message then „OK." appears in
the display. If there are more error messages then
all the messages can be displayed by turning the
control knob.
Press the c on tro l knob in order to return to
X X
submenu.

4.22 Performing reset

As for reset option, all settings are restored to factory settings (standard settings
are configured by a service technician) except a day of a week and an hour.
Note: All personal settings are reset to default values. This procedu-
re cannot be cancelled.
3
"Settings" symbol has been selected in the main menu.
Error message (-s) is (are) shown in the display.
Settings
Error
information
Settings
Settings
52