Temperature Set During Operation; Setting Heating Mode During Operation - Webasto MultiControl Operating Instructions Manual

Turn the c ontrol knob in order to choose the
X X
desired temperature.
Press the c o ntrol knob in order to confirm
X X
selection
Heating symbol and selected heating temperature
are shown in the display.
Quick start button shows green light.

4.3.3 Temperature set during operation

3
The heater is in the heating mode.
Turn the c ontrol knob in order to choose the
X X
desired temperature.
Press the c o ntrol knob within 5 seconds in
X X
order to confirm selection.

4.3.4 Setting heating mode during operation

3
The heater is in the heating mode.
Press the c o ntrol knob in order go from tem-
X X
perature selection to heating mode selection.
Turn the c ontrol knob in order to choose the
X X
desired heating mode*.
Heating starts functioning.
Heating
Temperature
16