Preparing For Use - Swift Motorhomes 2013 Owner's Service And Warranty Handbook

n. Upper handle: for easy emptying
o. Pull-out handle: for easy transport of the
eate tank.
p. Wheels
q. Rotating emptying spout: ensures that the
waste tank can be easily and hygienically
emptied.
r. Access hatch to waste tank: lockable from
the outside of the vehicle.
Introduction
The Thretford cassette toilet is a high quality
product. The functional design combines
modern styling and ease of use and the toilet
forms an integrated part of your caravan
or camper bathroom. The Cassette toilet
is manufactured from high quality synthetic
material This makes it a durable, user and
maintenance friendly toilet.
The toilet is made up of two parts, a
permanently fixed part and a waste tank that
is accessible from the outside. The removable
waste tank is located, under the toilet bowl
and can be removed via a door on the outside
of the caravan or camper.

PREPARING FOR USE

C-402C, C-402X and C-403L
1. Open the access door on the outside of
your caravan or camper.
C-402C and C-402X
2. Rotate the waste tank emptying spout
90 degrees and remove the water filling
extension (you will find it positioned
beneath the handle closest to the
emptying spout).
3. Rotate the waterfill funnel outwards,
remove the cap and place the extension
on the waterfill funnel. Add the stated
amount of Thretford fresh water additive to
the water tank. This ensures a better and
cleaner flush and keeps the water in the
flush tank fresh.
4. Fill the water tank with clean water.
Warning: keep water level below the top of
the water filling funnel.
5. Remove the extension and return to its
original position on the waste tank.
Note: depending on the space between the
door and wate tank, this extension part may
also be fixed on the door with a hook. Screw
the cap back onto the water filling funnel and
push back inwards towards the side of the
flush water tank.
Note: 150ml of water will remain in the waterfill
funnel when the water tank is empty.
C-402C, C-402X and C-403L
6. Remove the waste tank by pulling the
safety catch upwards.
7. Pull the waste tank outward to the stop.
Tip it slightly and take the tank fully out.
8. Place the tank upright and turn the
emptying spout upwards.
9. Remove the cap, with the measuring
cup inside, from the emptying spout and
pour the stated quantity of toilet fluid into
the waste tank. This avoids unpleasant
smells in the waste tank and keeps the
inside of the waste tank clean. Next add
approximately 2 litres of water - enough to
ensure that the bottom of the waste tank
is covered. Screw the cap back onto the
emptying spout. Turn the emptying spout
back to its original position. N.B. The
emptying spout measuring cap is supplied
in the same packaging as this manual.
WARNING! Never add toilet fluid via the
valve blade or via the toilet bowl.
10. Slide the waste tank back into its original
position via the access door.
WARNING! Never use force if you cannot
get the tank back into place easily. This may
cause serious damage.
11. Made sure that the wate tank is secured
with the safety catch. Shut the access
161