Table of Contents
Advertisement
Punch
Punch
Introduction
Punching is done on sheet level. Activate punching by setting /Punch to 4. When /Punch is set to
0, punching is disabled and the content of /PunchDetails is ignored.
In addition, OutputType must be set to Auto, or to any tray which supports punching. Punch
options are provided in the PunchDetails dictionary.
NOTE
Physical constraints can disable certain punching types. For example, A3 cannot be punched
long-edge and A5 can only have 2 holes long-edge.
Example
<<
/Punch 4
/PunchDetails
<<
/Type 12
/PunchLocation string
/PunchPattern string
/ReadingOrientation (portrait | landscape)
>>
>> setpagedevice
PunchDetails
The supported values for /PunchLocation and /Type are:
/PunchLocation
(Top)
(Bottom)
(Left)
(Right)
The supported values for /PunchPattern are:
/PunchPattern
(2-hole)
(3-hole)
(4-hole)
(fixed)
(none)
82
Chapter 5 - Adobe® PostScript® 3™
/Type
Description
12
Relative to the ReadingOrientation
given in PunchDetails.
12
12
12
Description
Number of holes
Selects a puncher with a fixed punch pattern
No punching
imagePRESS C7010VPS series v2.2
Advertisement
Table of Contents
