Table of Contents
Advertisement
Printer MIB
prtGeneralGroup
Introduction
The prtGeneralGroup exists of:
• prtGeneralConfigChanges
• prtGeneralCurrentLocalization
• prtGeneralReset
• prtGeneralCurrentOperator
• prtGeneralServicePerson
• prtInputDefaultIndex
• prtOutputDefaultIndex
• prtMarkerDefaultIndex
• prtMediaPathDefaultIndex
• prtConsoleLocalization
• prtConsoleNumberOfDisplaylines
• prtConsoleNumberOfDisplayChars
• prtConsoleDisable
• prtAuxiliarySheetStartupPage
• prtAuxiliarySheetBannerPage
• prtGeneralPrinterName
• prtGeneralSerialNumber
• prtAlertCriticalEvents
• prtAlertAllEvents
prtGeneralConfigChanges
Access: read only item.
It is unclear from the SNMP description what exactly a configuration change is, there is a lot of
room for interpretation. But this counter is not really used for (accurately) counting the
configuration changes, but more for cache invalidation.
The value of the counter is persistent. The counter is reset after reinstallation or after a software
upgrade of the controller.
prtGeneralCurrentLocalization
Access: read only item.
The general index prtGeneralCurrentLocalization points to the actual console index.
prtGeneralReset
Access: read-write item.
A read operation returns 3 (notResetting).
A write operation with value 3 (notResetting) has no effect.
A write operation with value 4 (powerCycleReset) causes the reset of the controller.
imagePRESS C7010VPS series v2.2
Printer MIB
Chapter 9 - SNMP
173
Advertisement
Table of Contents
