1. Manuals
  2. Brands
  3. Océ Manuals
  4. Printer
  5. imagePRESS C7010VPS series
  6. Technical manual

Océ imagePRESS C7010VPS series Technical Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Flowing productivity.
Impressive colour.
Océ
imagePRESS
C7010VPS series
Technical guide
Technical Reference
Manual

Advertisement

Table of Contents
loading

Related Manuals for Océ imagePRESS C7010VPS series

Summary of Contents for Océ imagePRESS C7010VPS series

  • Page 1 Océ imagePRESS C7010VPS series Flowing productivity. Impressive colour. Technical guide Technical Reference Manual...
  • Page 2 Copyright © 2013, Océ All rights reserved. No part of this work may be reproduced, copied, adapted, or transmitted in any form or by any means without written permission from Océ. Océ makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.

  • Page 3: Table Of Contents

    Command line options to obtain a status reply..................40 Removing print jobs............................41 Authentication rules..........................41 Command line options..........................42 behaviour..............................43 behaviour............................43 Chapter 4 The socket connection.....................45 Introduction..............................46 Socket specifications............................47 attributes............................47 Socket configuration............................48 Enable/disable the socket interface......................48 port..............................49 Socket behaviour............................50 Socket behaviour.............................50 imagePRESS C7010VPS series v2.2...
  • Page 4 Type42....................112 Convert PDF TrueType fonts as CID font Type2..................113 Include PDF fonts and resources on every page.................114 fonts...............................115 Chapter 7 Colour management.......................117 PostScript / PDF colour architecture......................118 Device simulation and Device Link......................120 Select composite output profiles......................121 imagePRESS C7010VPS series v2.2...
  • Page 5 MIB........................172 Printer MIB..............................173 prtGeneralGroup............................173 prtCoverTable............................176 prtLocalizationTable..........................177 System resources...........................178 prtInputGroup............................179 prtOutputGroup............................184 prtMarkerGroup.............................188 prtMediaPathGroup..........................190 prtChannelGroup...........................193 prtInterpreterGroup..........................195 prtConsoleGroup............................197 prtAlertTableGroup..........................199 Job monitoring MIB.............................203 General group............................203 Job submission ID group........................205 group...............................206 Attribute group............................210 Oce Job Management MIB..........................214 Operation group.............................214 Billing Counters............................215 imagePRESS C7010VPS series v2.2...
  • Page 6 Page programming..........................292 Finishing without attribute BundleItemIndex..................293 Finishing with attribute BundleItemIndex....................294 Chapter 11 printing........................297 End-user functionality..........................298 Settings Editor..............................300 Miscellaneous...............................301 Chapter 12 Hot folder printing......................303 folder..............................304 Chapter 13 Scan-to-file and scan-to-email..................307 Scan job type specification..........................308 Chapter 14 IPDS.........................313 imagePRESS C7010VPS series v2.2...
  • Page 7 Connectivity..............................340 Resolution..............................341 Print characteristics............................342 Paper input handling............................343 Paper output handling..........................345 Introduction to fonts.............................347 Fonts handling..............................350 Colour Mapping Tables..........................352 Colour management in IPDS mode......................353 Not supported IPDS topics..........................354 Differences between TP and DP colour management ................355 Index..........................357 imagePRESS C7010VPS series v2.2...
  • Page 8 Contents imagePRESS C7010VPS series v2.2...

  • Page 9: Chapter 1 Introduction

    Chapter 1 Introduction...

  • Page 10: This Manual

    This manual describes software version 2.2 of the PRISMAsync for the imagePRESS C7010VPS series. For whom is this Technical guide intended? The imagePRESS C7010VPS series Technical Reference Manual (TRM) is not the user manual of imagePRESS C7010VPS series. The TRM provides the information about the behaviour, configuration and programming of the imagePRESS C7010VPS series.

  • Page 11: Trademarks

    Systems Incorporated. Products in this publication are referred to by their general trade names. In most, if not all cases, these designations are claimed as trademarks or registered trademarks of their respective companies. Chapter 1 - Introduction imagePRESS C7010VPS series v2.2...

  • Page 12: Additional Documentation

    Additional documentation Additional documentation Additional PRISMAsync documentation • The imagePRESS C7010VPS series User Manual describes how to use the system. RFC documentation A Request for Comments (RFC) is a document published by the Internet Engineering Task Force (IETF). An RFC describes methods, behaviours, research, or innovations applicable to the working of the Internet and Internet-connected systems.

  • Page 13: Supported Media

    Supported media Supported media Click to open the pdf file. NOTE You can open the pdf file in the browser. Chapter 1 - Introduction imagePRESS C7010VPS series v2.2...
  • Page 14 Supported media Chapter 1 - Introduction imagePRESS C7010VPS series v2.2...

  • Page 15: Chapter 2 Prismasync

    Chapter 2 PRISMAsync...

  • Page 16: Introduction

    After an error is resolved, printing can continue. The printer takes care of job integrity, i.e. it ensures that the final result generated by the printer matches the specification, regardless of errors occurring during the printing process. Chapter 2 - PRISMAsync imagePRESS C7010VPS series v2.2...

  • Page 17: Prismasync Context

    The PRISMAsync is part of the imagePRESS C7010VPS series. For the imagePRESS C7010VPS series, the PRISMAsync provides the mechanisms for printing in both 600 and 1200 dpi. Job control and data processing for print, scan and copy are handled by the PRISMAsync controller.

  • Page 18: Scheduled Jobs Queue

    The attributes of a streaming job cannot be edited. If on the imagePRESS C7010VPS series the history is enabled, streaming jobs end up in the History queue. However, the streaming job cannot be copied to the 'Waiting jobs queue' for re- print.

  • Page 19: Waiting Jobs Queue

    Waiting jobs queue Waiting jobs queue Jobs in the imagePRESS C7010VPS series can be kept in ‘Waiting jobs queue’. The 'Waiting jobs queue' contains jobs that have to be kept on the system for some time. It is not yet known when they should be printed.

  • Page 20: Media Selection

    Settings Editor. Generic media attributes In the imagePRESS C7010VPS series, a media type is defined by 10 media attributes. These media attributes are inspired on the PostScript pagedevice attributes. See the table below for the 10 media attributes. These 10 attributes are used for selecting a tray for a media type that is specified for a job.
  • Page 21 Each media type has a media tab attribute. The tab attribute specifies if a media must be handled as a tab sheet. The tab attribute also defines how the tab sheet must be handled by the imagePRESS C7010VPS series. Chapter 2 - PRISMAsync imagePRESS C7010VPS series v2.2...
  • Page 22 Both are rectan- gular. For the imagePRESS C7010VPS series, the insert sheet attribute is an independent attribute that can be set for all media, including tab media. Therefore, tab media is sent via the bypass if the insert sheet attribute is true.
  • Page 23 • Adjust the separation of paper from decks. Value: -5 to +5, default: 0 Image clear level adjustment: • Improve "Intermediate Transfer Belt" (ITB) cleaning performance. Value: -10 to +10, default: 0. An increased value results in higher ITB cleaning. Chapter 2 - PRISMAsync imagePRESS C7010VPS series v2.2...
  • Page 24 White patch: choose positive values • Amount: Reduce white patch/fading at the trail end of paper. This can typically appear on curled paper or curl-prone paper types in 2-sided printing. Value: -20 to +20, Default: 0 Chapter 2 - PRISMAsync imagePRESS C7010VPS series v2.2...

  • Page 25: Workflow

    • Number of folded sheets • Number of punched sheets • Number of insert sheets • The time the job was received by the system • The time the job was started Chapter 2 - PRISMAsync imagePRESS C7010VPS series v2.2...
  • Page 26 You can create one or more AWFs in the Settings Editor in section 'Preferences'. Default AWF The imagePRESS C7010VPS series has one default queue. The default queue is the default AWF. The default queue cannot be deleted. Jobs are send to the default queue of the imagePRESS C7010VPS series, when: •...

  • Page 27: Hot Folders

    Automated Workflow can be coupled to the hot folder, or a job ticket can be stored in the hot folder. The Automated Workflow or the job ticket define how the jobs must be printed. The job ticket with JDF attributes can be defined using the printer driver. Chapter 2 - PRISMAsync imagePRESS C7010VPS series v2.2...

  • Page 28: Error Recovery

    The scan, copy and print error recovery strategy is based on the error detection capabilities of the imagePRESS C7010VPS series engines. The Print Engines will report the error situation to the PRISMAsync, which in turn can initiate User Interaction on the Console. Errors can be of an Operational (ORE), Machine-recoverable (MRE) or Permanent (PE) nature.

  • Page 29: Chapter 3 The Lpd Connection

    Chapter 3 The LPD connection...

  • Page 30: Introduction

    Introduction This section documents the implementation of the Line Printer Daemon (LPD) protocol mechanism in the imagePRESS C7010VPS series. This mechanism allows the imagePRESS C7010VPS series to communicate with the host system in order to print files. The use of LPD implies that all files transferred from the host to the imagePRESS C7010VPS series are always queued on the printer in the LPD print queue, before they are processed for actual printing.

  • Page 31: Terminology

    User An lpd user may be a human operator, but is more likely to be a application running on the user’s workstation, which communicates with the imagePRESS C7010VPS series. Therefore, in this chapter, the user is always addressed in the third person.

  • Page 32: General Specifications

    For LP system management and control purposes, the host system normally offers specific commands for the system administrator. These commands are local to the host system, and are of no direct need while printing to the imagePRESS C7010VPS series. LP management and control commands in System V Unix and BSD Unix...

  • Page 33: Spooling

    The use of LPD is bound to the use of the TCP/IP networking protocol stack, or, more specifically to the use of the TCP protocol. The printer-specific lpd server uses the well-known TCP port 515 for communication with the client system. Chapter 3 - The LPD connection imagePRESS C7010VPS series v2.2...

  • Page 34: Using The Lp Print Service

    USERNAME and JOBNAME will get a default value when no Ticket information is supplied. For the imagePRESS C7010VPS series, print jobs transferred via the LP interface may be coded in PCL or PostScript format, depending on the configuration of the printer. The printer LPD does not provide any data type conversion or filtering such as ASCII-to-PostScript;...

  • Page 35: Submitting Print Jobs

    On the contrary, by lpq the jobname returned by the device is the protocol filename at least for the LPD jobs, even if the ticket holds a different jobname. Other Jobname attributes coming from LPD or PDL are ignored. Chapter 3 - The LPD connection imagePRESS C7010VPS series v2.2...

  • Page 36: Banner Page

    Job attributes Class The LPD Class attribute is ignored. Banner page lpr’s “-h” option is normally used to suppress the banner page. It is accepted but produces no effect. Chapter 3 - The LPD connection imagePRESS C7010VPS series v2.2...

  • Page 37: Lp And Lpr Command Line Options

    (DVI) filter use plot filter use verbatim/raster filter use cifplot filter use Fortran carriage control fil- Chapter 3 - The LPD connection imagePRESS C7010VPS series v2.2...
  • Page 38 Example of print job submission (BSD style commands) Print 3 copies of each named file: lpr -PQoceprt -#3 invoice.pcl document.pcl Example of print job submission (Windows style commands) lpr -Sprinter -Pqueue printfile Chapter 3 - The LPD connection imagePRESS C7010VPS series v2.2...

  • Page 39: Reading Printer Job And Printer Status

    John: [job 1AURIGA] anotherjob.ps 13243 bytes Frame_A3_LandScape.ps 1168 bytes Frame_A4_LandScape.ps 1168 bytes Frame_A4_Portrait.ps 1185 bytes Frame_B4.ps 1185 bytes Frame_Folio_LandScape.ps 1168 bytes Frame_Foolscap.ps 1168 bytes Frame_Ledger_LandScape.ps 1177 bytes Frame_LegalGov_LandScape.ps 1168 bytes Chapter 3 - The LPD connection imagePRESS C7010VPS series v2.2...

  • Page 40: Command Line Options To Obtain A Status Reply

    -u<userlist> user ... status of jobs from user NOTE There may be specific command line options available in specific LP host implementations, which are not listed in the above table. Chapter 3 - The LPD connection imagePRESS C7010VPS series v2.2...

  • Page 41: Removing Print Jobs

    The names of the Control and Data Files which are removed from the LP print queue will be reported back to the user. Chapter 3 - The LPD connection imagePRESS C7010VPS series v2.2...

  • Page 42: Command Line Options

    312 and print queue ‘myqueue’. In such case both print jobs will be removed from the LP print queue. Chapter 3 - The LPD connection imagePRESS C7010VPS series v2.2...

  • Page 43: Lpd Behaviour

    When a job is fully ripped by the PDL unit it is removed from the Spool queue, and then will not be visible through lpq or removable through lprm. On the imagePRESS C7010VPS series, the job is visible on the local user interface as soon as spooling starts.
  • Page 44 Multiple files that are submitted by one lpr command are treated as multiple jobs on the imagePRESS C7010VPS series. Multiple files are printed in the order they were submitted and jobs submitted through another interface will not be printed in between.

  • Page 45: Chapter 4 The Socket Connection

    Chapter 4 The socket connection...

  • Page 46: Introduction

    Introduction This section describes the implementation of the Raw Socket protocol in the imagePRESS C7010VPS series. This mechanism allows the imagePRESS C7010VPS series to communicate with the host system in order to print files. Chapter 4 - The socket connection...

  • Page 47: Socket Specifications

    Network communication with the host is based upon TCP/IP protocols. The physical connection between host and imagePRESS C7010VPS series is based on an Ethernet TCP/IP connection. There is no high-level network protocol on top of the TCP protocol.

  • Page 48: Socket Configuration

    Socket configuration Enable/disable the socket interface You can enable/disable the raw socket interface using imagePRESS C7010VPS series. If it is disabled, the host is not able to connect to the printer via this interface. The state of the switch is persistent over a power down cycle.

  • Page 49: Tcp Port

    The TCP port value specifies which TCP port number is used for establishing a socket interface connection between host and imagePRESS C7010VPS series. Whenever the TCP port value has been changed within the PRISMAsync Settings Editor, it is necessary to reboot the printer in order to use this new TCP port value.

  • Page 50: Socket Behaviour

    If ’spool full’ occurs during the reception of a job, the job is aborted. Cancel jobs When a job is cancelled on the imagePRESS C7010VPS series while it is being received, job data is received until the connection is closed by the submitting host.

  • Page 51: Chapter 5 Adobe® Postscript® 3

    Chapter 5 Adobe® PostScript® 3™...

  • Page 52: Introduction

    Introduction Introduction This chapter describes the imagePRESS C7010VPS series specific extensions of Adobe PostScript 3, version 3019. PostScript is an interpretive Page Description Language, capable of transmitting text, graphical objects and sampled images to a PostScript printer or display. The PRISMAsync supports Adobe PostScript 3.

  • Page 53: Postscript 3 Implementation

    All specification contradictions, which are detected, are logged (but not to the SDS log file). Settings Editor settings Supported Settings Editor parameters are product dependent. Error pages Error pages are created when: Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...
  • Page 54 In case of errors in the job this usually results in a generic error page. However, this depends on what is defined in the error handler of the job. Errors can also result in a blank page, no page at all, etc. Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 55: User Parameters

    MaxUPathItem MinFontCompress VMReclaim Set to 0, automatic garbage collection VMTreshold Supported (next parameters are from SUP3011) JobTimeout Supported. Default value is defined by the Job- Timeout system parameter. WaitTimeout Supported Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 56: System Parameters

    Read-only parameter, set to “IEEE” Revision Read-only parameter. This is about the system’s revi- sion, not just PostScript. StartJobPassword Supported as per the Adobe specs. Always “null” (inter- preter’s default). Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...
  • Page 57 MaxRasterMemory Read-only parameter. MinBandBuffers Not supported. RamSize Read-only parameter. SourceListBypass Read-only parameter. ValidNV Read-only parameter, always true. WaitTimeout Default 0, no timeout. Determines the default for the WaitTimeout user parameter. Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 58: Device Parameters

    Mounted True PhysicalSize PrepareAction Not supported Removable False Searchable True SearchOrder Type FileSystem Writeable True %ram% This device is supported. %ram% Parameter Comment Blocksize Not supported Free Supported HasNames True Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...
  • Page 59 Mounted True PhysicalSize 409600 PrepareAction Not supported Removable False Searchable False SearchOrder Type FileSystem Writeable True A PostScript programme cannot initialise the device; modifications of the Action parameters are ignored. Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 60: Pagedevice Parameters

    For more information on this subject, refer to the ‘PostScript Language Reference Manual, Third Edition’. Example - 2-sided << /Duplex true >> setpagedevice Example - Double staple << /Staple 2 /StapleDetails << /Type 16 /StapleLocation 3 >> >> setpagedevice Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 61: Initial Page Device

    During start-up of the printer, an initial default pagedevice dictionary is constructed based on fixed initial values and on the contents of the Settings Editor, which contains the default values (such as Duplex, Staple, PageSize, Jog, OutputDevice and Tumble). Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 62: Bind

    Right edge binding and bottom edge binding are implemented by rotating all pages 180 degrees. Example BindDetails contains: << /Type 7 /BindType (SaddleStitch | GlueBinding) /NumStaples integer /StapleOrientation (horizontal | vertical) /BindEdge string /ReadingOrientation (portrait | landscape) >> Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...
  • Page 63 BindDetails (Right) Possible values for ReadingOr- (Top) ientation are (portrait) or (landscape) (Bottom) The supported Bind positions according to the ReadingOrientation are shown in the following figure: Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...
  • Page 64 Bind Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 65: Collate

    [5] Example of Page Sets Defined by Collate/Number of Copies Example Collate << /Collate false >> setpagedevice % Sort by page << /Collate true >> setpagedevice % Sort by set Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 66: Duplex

    If the pagedevice is changed while on the back side of a duplex sheet, the current sheet will be ejected and printing will continue on the front side of a new sheet. “Changed” means that at least one of the pagedevice parameters has a new value. Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 67: Fold

    Multi-folding (folding several pages together) is specified by setting /Fold to 2 or 3, while sheet folding is specified by setting /Fold to 4. A sheet that is to be folded is required as short edge feed. Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 68: Halftoning

    Changing the HWResolution pagedevice parameter changes the resolutions to which page contents will be rasterised. Currently, the resolution is set on a per job basis and the Settings Editor defaults are used. Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 69: Jog

    • 3: jog at the end of a subset. NOTE The behaviour of values 2 and 3 is the same. Example The following line will cause the printer to jog after each set: << /Jog 3>> setpagedevice Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 70: Media Selection

    40 characters. /MediaColor Colour Free string in Configurable UTF-8; clipped to string, not null 40 characters. /MediaWeight Weight Any number; Configurable rounded to inte- string, not null gers, if required. Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...
  • Page 71 Pagedevice attributes can be set in separate calls of the PostScript setpagedevice function. The order of the calls is arbitrary. For the imagePRESS C7010VPS series, no automatic resizing or clipping is done. An error page is created if a page size is requested that the print engine cannot handle.
  • Page 72 The MediaColor string is case sensitive. Parameter /MediaColor is represented by a text string. Supported values Description blue Blue buff Buff clear Clear noColor Clear nocolor Clear no-color Clear goldenrod Goldenrod golden rod Goldenrod Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...
  • Page 73 Silver custom value custom value The imagePRESS C7010VPS series supports coloured icons. The value of the colour attribute of the icon must be available in a list of supported values. The colour name is mapped onto an RGB value. The imagePRESS C7010VPS series supports the specification of RGB colours for media in the media catalogue via the Settings Editor.
  • Page 74 Media selection MediaType matching and completion Media types in the imagePRESS C7010VPS series are defined by 10 media type attributes. However, it is possible some of the 10 media type attributes are not defined. This paragraph describes how incomplete media type definitions are completed.
  • Page 75 The imagePRESS C7010VPS series supports "tab-inclusive" printing. With tab-inclusive printing, the media size and the bitmap in the job include the width of the tab. For example, for tab-inclusive printing on an A4 tab sheet, the specified media width is 223 mm.
  • Page 76 Media selection The imagePRESS C7010VPS series supports standard sized and custom sized tab media, within the engine limitations. The tabs are always on the trailing edge of the sheet. The imagePRESS C7010VPS series supports tabs with a maximum width of 15 mm.
  • Page 77 The modification of the /MediaType is done as follows: For types [Print on tab], [Tab sheets], [Inserted tab sheets]: Modified to [Inserted tab sheets]. For all other types: Modified to [Inserts]. Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...
  • Page 78 The feed direction of sheets that can be both LEF and SEF are selected based on finishing options activated for that sheet. For example, folding or short-edge stapling/punching will require SEF. If no restrictions, LEF is chosen, since LEF is the most productive. Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 79: Number Of Copies

    PostScript. If the value equals to 1, the value is taken from the ticket or from PostScript. Example To print 2 copies, setpagedevice can be called as follows: << /NumCopies 2 >> setpagedevice Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 80: Output Location

    The /OutputType entry in the pagedevice dictionary allows you to select the output device and output tray if several trays are available. imagePRESS C7010VPS series specific Output type The following values are supported for OutputType. The same tray can be addressed in several...
  • Page 81 Tray Folder_Tray Folder Selection of specific destinations is only possible when the corresponding finisher is installed. Value "Auto" lets the system choose the destination based on the selected finishing option(s). Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 82: Punch

    PunchDetails. (Bottom) (Left) (Right) The supported values for /PunchPattern are: /PunchPattern Description (2-hole) Number of holes (3-hole) (4-hole) (fixed) Selects a puncher with a fixed punch pattern (none) No punching Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...
  • Page 83 The punches are placed along the edge defined by /PunchLocation and relative to the / ReadingOrientation. The supported Punch positions according to the /ReadingOrientation are shown in the following picture: Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 84: Staple

    1 landscape staple (legacy) 2 portrait staples (legacy) (TopLeft) or (LeftTop) Relative to the ReadingOrientation given in StapleDetails (TopRight) or (RightTop) (BottomLeft) or (LeftBottom) (BottomRight) or (RightBottom) (LeftDual) (RightDual) (TopDual) (BottomDual) Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...
  • Page 85 Example How to select double stapling with the StapleDetails: % -------------- Double Staple ------------------ << /Staple 2 /StapleDetails << /Type 16 /StapleLocation 3 >> >> setpagedevice Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...
  • Page 86 Staple Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 87: Subsets

    If the following values are set: /Staple 3, /Jog 3, or /Collate true they are applied for EACH set, even if the values are set once at the beginning of the file. Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 88: Trim

    Trimming for glue binding In the table below, the cells marked in ORANGE are unsupported. Trimming for SaddleStitch booklets In the table below, the cells marked in ORANGE are unsupported. Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...
  • Page 89 Trim Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 90: Tumble

    Tumble printing can be enabled through the /Tumble parameter of the setpagedevice operator (standard PS3 behaviour). The older Océ specific /tumble parameter is not supported. Range Boolean: true/false. Example << /Duplex false /Tumble false >> setpagedevice Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 91: Unicode Media Selection

    For backward compatibility, the ISO Latin-1 media selection is also supported. When any string in MediaType, MediaName and MediaColor is not encoded in UTF-8, the concerning string is treated as an ISO Latin-1 encoded string. Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 92: Overview

    Not supported RollFedMedia Not supported Page image alignment Duplex Supported HWResolution Supported ImageShift Not supported ImagingBBox Supported Margins Supported MirrorPrint Supported NegativePrint Supported PageOffset Not supported Tumble Supported Page delivery Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...
  • Page 93 Supported SeparationOrder Supported Separations Supported Trapping Not supported TrappingDetails Not supported UseCIEColor Supported Device init and page setup BeginPage {pop} EndPage {exch pop 2 ne} Install Supported Unsatisfied parameter requests Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...
  • Page 94 Supported, product dependant OutputType 2, product dependant StapleDetails NOTE Any PostScript keys, which are not defined in above table, are not supported. NOTE Other PageSize policies can be specified in PostScript jobs. Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 95: Postscript Resources

    The error page is an 'invalid font' error and the name of the missing font appears in the Operand Stack. By default, font substitution is enabled. You must restart the controller when you enable or disable font substitution in the Settings Editor. Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...
  • Page 96 .pfb TrueType .ttf The TrueType specification is available online: http://developer.apple.com/ fonts/TTRefMan/index.html NOTE TrueType collection files (.ttc) are not supported. OpenType .otf The OpenType specification is .ttf available online: http://www.microsoft.com/ty- pography/otspec/ Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 97: List Of Available And Optional Fonts

    List of available and optional fonts List of available and optional fonts Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...
  • Page 98 List of available and optional fonts Chapter 5 - Adobe® PostScript® 3™ imagePRESS C7010VPS series v2.2...

  • Page 99: Chapter 6 Pdf

    Chapter 6...

  • Page 100: Introduction

    Introduction Introduction This chapter describes the imagePRESS C7010VPS series specific extensions of Adobe PDF. Adobe Portable Document Format (PDF) offers an application- and device-independent interchange format for the representation of electronic documents. The supported version is 1.7, ExtensionLevel: 3. A PDF document is designed for efficient random access and includes navigational information suitable for interactive viewing.

  • Page 101: Pdf Implementation

    You can switch to PDF2PS via the ‘Use PDF to PostScript conversion’ setting in the PDF preferences in the settings editor or through an automated workflow. PRISMAsync uses APPE version 2.6 Patch 1. Chapter 6 - PDF imagePRESS C7010VPS series v2.2...

  • Page 102: Job Settings

    • The system PDF defaults in the Settings Editor. • The job submission protocol. • Automatic workflow settings. • A job ticket, see chapter: JDF interface specification Chapter 6 - PDF imagePRESS C7010VPS series v2.2...

  • Page 103: Pdf Settings

    Convert PDF TrueType fonts as Type42 Convert PDF TrueType fonts as CID font Type2 Include PDF fonts and resources on every page Colour preset PDF specific preferences Setting APPE PDF2PS Force black overprint Chapter 6 - PDF imagePRESS C7010VPS series v2.2...

  • Page 104: Appe

    CMYK values are interpreted in the output colour space or in the simulation colour space when a composite output profile is used. In other cases the alternative colour associated with the spot colour in the PDF will be used. Chapter 6 - PDF imagePRESS C7010VPS series v2.2...

  • Page 105: Pdf Overprint Simulation

    DirectCMYK colour space into output colour space. DeviceCMYK colours or process colours that are not involved in overprint are also transformed from DirectCMYK colour space into output colour space. Chapter 6 - PDF imagePRESS C7010VPS series v2.2...

  • Page 106: Force Black Overprint

    When force black overprint is enabled, "black" objects are always printed with overprint even if overprint was not enabled in the original PDF document. This setting only has effect on PDF files which are printed through APPE. Chapter 6 - PDF imagePRESS C7010VPS series v2.2...

  • Page 107: Pdf Xobject Optimization

    XObjects by caching an intermediate representation of the content. Because this involves some overhead, by default the setting 'XObject optimization' is switched off. 'XObject optimization' can be switched on to improve the performance of certain VDP-like documents. Chapter 6 - PDF imagePRESS C7010VPS series v2.2...

  • Page 108: Pdf2Ps

    A PDF document can contain a number of boxes that enclose the page content. The PDF interpreter can set the media size based on the CropBox (default) or the MediaBox. NOTE Acrobat shows the pages based on the CropBox, not the MediaBox. Chapter 6 - PDF imagePRESS C7010VPS series v2.2...

  • Page 109: Transparency

    The PDF converter does not have access to the spot colour library. Therefore, if a spot colour is involved in transparency or overprint, the alternative colour in the PDF is used. Visible colour differences are possible with other areas where the spot colour is used. Chapter 6 - PDF imagePRESS C7010VPS series v2.2...

  • Page 110: Pdf Overprint Simulation

    CMYK colour space to output colour space. DeviceCMYK colours or process colours that are not involved in overprint are also transformed from CMYK colour space to output colour space. Chapter 6 - PDF imagePRESS C7010VPS series v2.2...

  • Page 111: Pdf/X Output Intent

    PDF: The input profile for CMYK is ignored and the PDF converter converts all other colours to the output intent profile. The PS3 interpreter then converts all colours from the output intent profile to the actual output profile. Chapter 6 - PDF imagePRESS C7010VPS series v2.2...

  • Page 112: Font Conversion

    TrueType fonts embedded in PDF files are converted into Type42 PostScript fonts. A conversion to Type42 fonts provides the best print quality. When you disable this setting, faulty TrueType font hinting in some fonts (Monotype BookAntiqua-BoldItalic, for example) can be solved. Chapter 6 - PDF imagePRESS C7010VPS series v2.2...

  • Page 113: Convert Pdf Truetype Fonts As Cid Font Type2

    A conversion to CID Type0 fonts provides the best print quality. When you enable this setting, faulty TrueType font hinting in some fonts can be solved. If this setting is enabled, double-byte TrueType fonts embedded in PDF files are converted into CID Type2 PostScript fonts. Chapter 6 - PDF imagePRESS C7010VPS series v2.2...

  • Page 114: Include Pdf Fonts And Resources On Every Page

    PostScript, all fonts and resources are sent at the beginning of each page. Enable this setting to solve performance issues with PDF data that repeatedly duplicates the same font on each page instead of using the same font for all pages. Chapter 6 - PDF imagePRESS C7010VPS series v2.2...

  • Page 115: Pdf Fonts

    Additional Fonts for APPE The following fonts can be used in a PDF job in APPE without being embedded: • AdobeArabic-Bold • AdobeArabic-BoldItalic • AdobeArabic-Italic • AdobeArabic-Regular • AdobeFanHeitiStd-Bold • AdobeGothicStd-Bold • AdobeHebrew-Bold • AdobeHebrew-BoldItalic Chapter 6 - PDF imagePRESS C7010VPS series v2.2...
  • Page 116 • AdobeMyungjoStd-Medium • AdobePiStd • AdobeSongStd-Light • AdobeThai-Bold • AdobeThai-BoldItalic • AdobeThai-Italic • AdobeThai-Regular • CourierStd-Bold • CourierStd-BoldOblique • CourierStd-Oblique • CourierStd • KozGoPr6N-Medium • KozMinPr6N-Regular • MinionPro-Regular • MyriadPro-Regular • Symbol Chapter 6 - PDF imagePRESS C7010VPS series v2.2...

  • Page 117: Chapter 7 Colour Management

    Chapter 7 Colour management...

  • Page 118: Postscript / Pdf Colour Architecture

    Colour defined in CIE-based colour spaces are also called device-independent colours. These are colours that have an input profile attached in the form of a PostScript Colour Space Array (CSA) that is also defined in the job. There are several CIEBased colour spaces: Chapter 7 - Colour management imagePRESS C7010VPS series v2.2...

  • Page 119: Output Profiles

    Using the PRISMAsync Settings Editor, a user can export and import the entire colour configuration of the controller at once. It is not possible to export individual colour configuration items like profiles. Chapter 7 - Colour management imagePRESS C7010VPS series v2.2...

  • Page 120: Device Simulation And Device Link

    • The input profile is used to convert the input colour space to the standard Profile Connection Space (PCS). • The output profile for the imagePRESS C7010VPS series is used to convert from PCS to the engine colour space. The engine colour space always uses CMYK values.

  • Page 121: Select Composite Output Profiles

    You must select the correct media family to ensure that the colours are printed correctly on a certain type of media. NOTE Device simulation is not supported in Transaction Printing. Chapter 7 - Colour management imagePRESS C7010VPS series v2.2...

  • Page 122: Define Composite Output Profiles

    If you use the factory default output profiles, the maximum toner coverage of the device is never exceeded. If the maximum toner coverage is exceeded, the PRISMAsync controller reduces the maximum toner coverage to the engine specific maximum limit. Chapter 7 - Colour management imagePRESS C7010VPS series v2.2...

  • Page 123: Overview Of Composite Output Profiles

    • If the output profile is a Device Link profile, the Device Link profile file is exported. NOTE The Simulation profile must be exported from overview 'Input Profile' overview in the Settings Editor. Chapter 7 - Colour management imagePRESS C7010VPS series v2.2...

  • Page 124: Save And Restore The Composite Output Profiles

    The output profile overview in the colour configuration report shows for a composite output profile: 1. The output profile type. 2. The name of the selected Simulation profile. 3. If paper simulation is enabled or disabled. Chapter 7 - Colour management imagePRESS C7010VPS series v2.2...

  • Page 125: Paper Simulation And Black Preservation

    If Device Link is used, the option 'Paper simulation' is not available. The Device Link must define how colours are mapped. The Device Link also defines if black preservation is used, or not. Chapter 7 - Colour management imagePRESS C7010VPS series v2.2...

  • Page 126: B&W Printing With Composite Output Profiles

    If B&W printing and Device Simulation are used together: the output is not guaranteed to be K- only. Reason: K-only is defined in the simulation profile, but not in the output values. Chapter 7 - Colour management imagePRESS C7010VPS series v2.2...

  • Page 127: Spot Colour Handling

    CMYK values. The calculate CMYK values will never be out of the gamut of simulated device. Then, a Device Link or output profile is used to convert the calculated CMYK values to the engine colour space. Chapter 7 - Colour management imagePRESS C7010VPS series v2.2...

  • Page 128: Transaction Printing Mode

    The "media family/halftone" combinations must not be used in TP mode. NOTE If the type of media is needed in TP mode, a new media definition must be made. A normal output profile must be assigned to the new media definition. Chapter 7 - Colour management imagePRESS C7010VPS series v2.2...

  • Page 129: Expired Licensed Mechanism

    An error page is generated when there is no "Advanced Colour Management" license. • When a user prints a job that was ripped before the license expired: The job can be printed with colour management using the device link. Chapter 7 - Colour management imagePRESS C7010VPS series v2.2...

  • Page 130: Pdf/X Output Intent With Composite Output Profiles

    For example: Use this workflow to simulate the printed output of a PDF/X file that: • Was prepared for the FOGRA39 printing condition, but • Which was printed on a Poing JetStream printer. Chapter 7 - Colour management imagePRESS C7010VPS series v2.2...
  • Page 131 Simulation profile Simulation profile CMYK Embedded CMYK Composite output profile source profile DeviceCMYK Output intent ICC profile [9] Colour flow within APPE when PDF/X output intent and composite output profile are available Chapter 7 - Colour management imagePRESS C7010VPS series v2.2...
  • Page 132 PDF/X output intent with composite output profiles Chapter 7 - Colour management imagePRESS C7010VPS series v2.2...

  • Page 133: Chapter 8 Accounting

    Chapter 8 Accounting...

  • Page 134: Introduction

    This chapter describes the accounting log files of the Accounting functionality in the imagePRESS C7010VPS series. The accounting log files contain information about the executed jobs. This chapter describes the lifetime, name and the content of the file, both syntactically and semantically. Chapter 8 - Accounting imagePRESS C7010VPS series v2.2...

  • Page 135: Use The Account Log File

    A job is allowed to stop at either sheet or set boundary. When the job is stopped, the job can be removed and the account information can be collected. • Idle time Chapter 8 - Accounting imagePRESS C7010VPS series v2.2...

  • Page 136: Account Settings

    Account-information for jobs can be specified in the printer driver, automatic workflows (AWF) and via the LUI. Job accounting settings Job settings Driver Account-ID CostCentre Custom System accounting settings System settings Settings Editor Default account-ID for streaming jobs Field separator UTF-8 header enabled Chapter 8 - Accounting imagePRESS C7010VPS series v2.2...

  • Page 137: Accounted Pages

    • When a job gets a Postscript RIP error, each printed page of that job is accounted. Not accounted pages • The pages that the user must remove after an error are not accounted. • Banner pages, trailer pages, sample sheets and shoot-outs are not accounted. Chapter 8 - Accounting imagePRESS C7010VPS series v2.2...

  • Page 138: Account Log File Definition

    Numeric string of 2 digits with leading zeros in the range 00..59 Indicates the minutes of the time. <ss> Numeric string of 2 digits with leading zeros in the range 00..59 Indicates the seconds of the time. <time> <hh><colon><mm><colon><ss> Chapter 8 - Accounting imagePRESS C7010VPS series v2.2...
  • Page 139 Numeric string of up to 9 digits; leading zeroes are not allowed. <char> Character. <str40> <char>+ String of up to 40 characters. <str255> <char>+ String of up to 255 characters. <whitespace> {<space> | <tab>} <duration> <digit><digit><colon><mm><colon><ss> <mid> Chapter 8 - Accounting imagePRESS C7010VPS series v2.2...
  • Page 140 EBNF grammar <digit>[<digit>] Media ID, identifying a media type used in the job, range 1..16 <separator>(<CR><LF>) | <LF> <fs><semicolon> | <comma> Field separator; which must be consistent throughout the log file. Chapter 8 - Accounting imagePRESS C7010VPS series v2.2...

  • Page 141: The Account Log File

    <str255> | <accdata> In a <firstrecord> the string describes the semantics of the corresponding <datafield> item in the <datarecord> records <accdata> Actual accounting data, as listed in paragraph "The accounting data items". Chapter 8 - Accounting imagePRESS C7010VPS series v2.2...
  • Page 142 Identification supplied by the submitter of the job (e.g OJT attribute 'JobNumber'). <jobid> <num> Identification generated by the controller: uniqueness is not guaranteed. <jobtype> COPY | IP | AP | SYSTEM | SCAN | SCAN2MBX | MBXCOPY COPY: copy job. Chapter 8 - Accounting imagePRESS C7010VPS series v2.2...
  • Page 143 <str255> User name specified in the job. <jobname> <str255> The name supplied by the submitter of an IP/AP job, the generated filename for a SCAN job, empty for all other job types. Chapter 8 - Accounting imagePRESS C7010VPS series v2.2...
  • Page 144 (external finisher), SPECIAL (upper output bin), iBLM (BookletMaker), BASIC, HCS. <nofprinteda4bw> <num> Number of printed A4-like sides containing only black and white information or inserts. <nofprinteda4c> <num> Number of printed A3-like sides containing colour information. Chapter 8 - Accounting imagePRESS C7010VPS series v2.2...
  • Page 145 <str40> Contains the colour of media<mid>; the following names are standardised: WHITE, RED, GREEN, BLUE, CYAN, MAGENTA, YELLOW, PINK, GREY, BLACK, PURPLE, ORANGE, BUFF, GOLDENROD, CLEAR. <medianame<mid>> <str40> Descriptive name for media<mid>. Chapter 8 - Accounting imagePRESS C7010VPS series v2.2...
  • Page 146 <nofpunches> <num> Number of punches made by finisher. <noffolds> <num> Number of folds made by finisher. <nofbooklets> <num> Number of booklets made by finisher. <nofbinds> <num> Number of binds made by finisher. Chapter 8 - Accounting imagePRESS C7010VPS series v2.2...

  • Page 147: Miscellaneous

    * Username "Key Operator/System Administrator" is reserved for clean jobs and for jobs containing Key Operator or System Administrator settings. * The reserved account IDs and users are not enforced/filtered by the controller. Chapter 8 - Accounting imagePRESS C7010VPS series v2.2...

  • Page 148: Implementation Aspects

    The table below lists which fields are supported: Field Supported <documentid> <jobid> <jobtype> <startdate> <starttime> <activetime> <idletime> <readydate> <readytime> <result> <username> <jobname> <costcentre> <custom> <accountid> <jobaddressee> <nofscana4> <nofscana3> <nofsinglestaples> <nofdoublestaples> <noffinishedsets> <outputdestination> <nofprinteda4bw> <nofprinteda4c> <nofprinteda3bw> <nofprinteda3c> <tonerblack> <tonercolor> <nofsimplex<x>> Chapter 8 - Accounting imagePRESS C7010VPS series v2.2...
  • Page 149 2-sided sheets in jobs with layout not equal to Normal (e.g. booklet). • The logged output destination is the preferred output destination specified in the job. The actual output location where (part of) the job was delivered can differ due to output linking. Chapter 8 - Accounting imagePRESS C7010VPS series v2.2...
  • Page 150 Implementation aspects Chapter 8 - Accounting imagePRESS C7010VPS series v2.2...

  • Page 151: Chapter 9 Snmp

    Chapter 9 SNMP...

  • Page 152: Introduction

    • RFC 3805: Printer MIB version 2. • RFC 2790: Host Resources MIB • RFC 2707: Job Monitoring MIB - V1.0 R. Bergman, T. Hastings, S. Isaacson, H. Lewis - November 1999 Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 153: Snmp Support

    3 predefined host names or IP addresses for SNMP managers is supported. SNMP default user access To be backwards compatible, the default configuration is: • SNMPv3 enable • SNMPv1/v2c enable with full access Internationalisation All non US-ASCII character strings are returned in UTF-8. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 154: Snmp User Table

    <community name> for Océ drivers using SNMP. It is ed- itable on the controller side and on the driver side. Default value is “oce_read”. (Only present if the SNMP enable switch is set.) Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 155 Default value is “oce_read”. (Only present if the SNMP enable switch is set.) Remote SNMP managers Predefined IP addresses for SNMP manager applications. The PRISMA- sync supports 3 predefined SNMP manager addresses. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 156: Snmp Items In Configuration Report

    SNMP items in configuration report SNMP items in configuration report There is a “SNMP communication” header item in the imagePRESS C7010VPS series configuration report. The “SNMP communication” has the following items: • SNMP communication configured. Value: configured or Not configured.

  • Page 157: Performance Requirements

    • 25 OIDs get/set per seconds for system monitoring. • 225 OIDs get per seconds for job monitoring when job monitoring is supported. The PRISMAsync must be able to handle 3 SNMP manager applications concurrently. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 158: Example In Pseudo Code

    Example in pseudo code Introduction Below you can find an example in pseudo code of the implementation of SNMP. Suppose you have a class SNMP at your disposal to export basic functions: Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 159 Example in pseudo code Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 160: Mib-Ii

    • A Printer only device will reply “1.3.6.1.4.1.1552.20.10” • A Copier device will reply “1.3.6.1.4.1.1552.20.11” • A Scanner device will reply “1.3.6.1.4.1.1552.20.13” The imagePRESS C7010VPS series is a multi function device. SysUpTime Access: read only item. Uptime of the MIB-II Agent: the time (in hundredths of a second) since the network management portion of the system was last re-initialised i.e.
  • Page 161 NULL character. SysServices Access: read only item. A value which indicates the set of services that this entity primarily offers. MIB-II subagent does the implementation of this OID. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 162: The Network Interface Group Of Mib-Ii

    PRISMAsync supports the following interface types: • Ethernet-csmacd (6) • softwareLoopback (24) ifType is part of object: ifTable.ifEntry ifSpeed Access: read only item. An estimate of the current bandwidth of the interface in bits per second. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 163 The network interface group of MIB-II ifSpeed is part of object: ifTable.ifEntry ifPhysAddress Access: read only item. This OID returns the MAC address for each network interface index. ifPhysAddress is part of object: ifTable.ifEntry Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 164: Host Resources Mib

    "DateAndTime" textual convention as defined in RFC1514; string with 8 bytes. Example: 07.D3.0A.1C.10.06.36 (hex) for 2003 October 28 10:06:36 Bytes Contents year (in network byte order) month hours minutes seconds deci-seconds (always "0") hrSystemInitialLoadDevice Access: read only item. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 165: The System Group Of

    On systems that have a fixed maximum, this object can help diagnose failures that occur when this maximum is reached. This item is implemented as a dummy entry and always returns the value 0. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 166: The Storage Group Of The Hr Mib

    Access: read only item. Index in the table Description "Spool Area" "Set Memory" "Virtual Memory" hrStorageAllocationUnits Access: read only item. The allocationsUnits is defined as storage size in bytes. This object returns 1024. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 167: The Storage Group Of The Hr

    The amount of storage represented by this entry that is allocated, in units of allocation units. hrStorageAllocationFailures Access: read only item. The number of requests for storage that could not be honoured. It is set to 0 at each start-up and not used (always 0). Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 168: The Device Group Of The Hr Mib

    • The imagePRESS C7010VPS will return "1.3.6.1.4.1.1552.20.14.1.7010". • The imagePRESS C6010VPS will return "1.3.6.1.4.1.1552.20.14.1.6010". • The imagePRESS C6010S will return "1.3.6.1.4.1.1552.20.14.1.6000". hrDeviceStatus Access: read only item. This object represents the current device status of the system. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 169: The Device Group Of The Hr

    The device group of the HR MIB The imagePRESS C7010VPS series common status overview table System state Device Printer Display text Error state Printer warming-up running idle (3) “Printer warming-up” Service Copy Mode (includ- down (5) other (1) “System in Service Copy...

  • Page 170: The Device Group Of The Hr

    4. None-critical alert conditions do not cause a “Supplies not available” system status. The reason is that imagePRESS C7010VPS series can still print jobs in these cases. For example, toner low, Output tray missing, output full for the external finisher, stapler empty or input tray empty are none-critical alert conditions.

  • Page 171: The Device Group Of The Hr

    Input tray empty Overdue preventive maintenance The error-conditions Low paper (0), Door Open (4), Input tray missing(8), Output near full (11), Marker supply missing(10) and Overdue preventive maintenance (14) are not supported. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 172: Other Groups Of The Hr Mib

    Other groups of the HR MIB Disk storage group Not supported. Partition group Not supported. File system group Not supported. Running software group Not supported. Running software performance group Not supported. Installed software group Not supported. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 173: Printer Mib

    Access: read-write item. A read operation returns 3 (notResetting). A write operation with value 3 (notResetting) has no effect. A write operation with value 4 (powerCycleReset) causes the reset of the controller. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 174 This OID returns the index to the default Output Tray of the system. prtMarkerDefaultIndex Access: read only item. The imagePRESS C7010VPS series have four markers. prtMediaPathDefaultIndex Access: read only item. This object points to the Long Edge Duplex media path. See chapter "prtMediaPathGroup".
  • Page 175 Access: read only item. This object counts the total number of alerts (critical and non-critical) that are recorded in the alert table. The value of this object is RESET after a power cycle operation. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 176: Prtcovertable

    Introduction Each entry in the prtCoverTable consists of the following objects: • prtCoverDescription • prtCoverStatus Each cover or door in the system will have one entry. prtCoverDescription Not supported. prtCoverStatus Not supported. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 177: Prtlocalizationtable

    String Value = “en”. prtLocalizationCountry Access: read only item. Index Number = 1. String Value = “GB”. prtLocalizationCharacterSet Access: read only item. Index Number = 1. Integer Value = csIsolatin1(4) or csUTF8(106). Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 178: System Resources

    This object contains 1. Only one printer entry is defined in the device group of the HR MIB, see "hrDeviceIndex". prtDeviceRefIndex Access: read only item. This object will always return 1. Only one printer entry is defined in the device group of the HR MIB, see "hrDeviceIndex". Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 179: Prtinputgroup

    • prtInputCurrentLevel • prtInputStatus • prtInputMediaName • prtInputName • prtInputVendorName • prtInputModel • prtInputVersion • prtInputSerialNumber • prtInputDescription • prtInputSecurity • prtInputMediaWeight • prtInputMediaType • prtInputMediaColor • prtInputMediaFormParts • prtInputMediaLoadTimeout • prtInputNextIndex Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 180 (prtInputDimUnit). Custom sizes: when this feature exists, the custom sizes are shown as defined in the media catalogue. Supported media on The imagePRESS C7010VPS series supports the paper sizes as defined in: page prtInputMediaDimXFeedDirDeclared Access: read only item. The orientation of the paper in the input sub-unit and the media size determine the size to be expressed in the cross feed direction.
  • Page 181 Special case when all media attributes are empty: <empty string>. Special case when no media is assigned to the tray: undefined. prtInputName Access: read only item. User-defined custom Media Names up to 63 bytes. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 182 Use the standardised string values from ISO 10175 (DPA) and ISO 10180 (SPDL). SNMP product-independent supported values are: • stationery = "Separately cut sheets of an opaque material." • transparency • tab-stock Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 183 The imagePRESS C7010VPS series information: • stationery When the tray is set to 'undefined', the value 'Unknown' (-2) will be communicated. prtInputMediaColor Access: read only item. The name of the colour of the medium associated with this input sub-unit using standardised string values from ISO 10175 (DPA) and ISO 10180 (SPDL).

  • Page 184: Prtoutputgroup

    The remaining capacity of the output tray, expressed in prtOutputCapacityUnit (= sheets) For all output trays and all products, the return value is "Unknown" (-2) if the output is full. prtOutputStatus Access: read only item. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 185 OEM or brandless output device. prtOutputModel Access: read only item. The string "" is returned. prtOutputVersion Access: read only item. The string "" is returned. prtOutputSerialNumber Access: read only item. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 186 The reading surface that will be 'up' when pages are delivered to the associated output tray. Values are faceUp (value 3) and faceDown (value 4). • StackerStaplerAJ Saddle Tray: facedown (4) • StackerC1 1 Stack Tray: facedown (4) Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 187 (3) Tray StackerC1 1 Top Tray off (4) StackerStaplerAJ Up- on (3) per Tray StackerStaplerAJ on (3) Lower Tray StackerC1 2 Stack on (3) Tray StackerC1 2 Top Tray off (4) Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 188: Prtmarkergroup

    Fixed value: tenThousandthsOfInches(3). prtMarkerAddressabilityFeedDir Access: read only item. The maximum number of addressable marking positions in the feed direction per 10000 units of measure specified by prtMarkerAddressabilityUnit. prtMarkerAddressabilityXFeedDir Access: read only item. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 189 According to the printer MIB, the status of the marker sub-unit is associated with the toner supply: • Non Critical Alert(8) for "toner is low" situation. • Critical Alert (16) for "toner is empty" situation. • Available and Idle(0) for all other situations. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 190: Prtmediapathgroup

    4200 iph Maximum speed for the imagePRESS C6010S/C6010VPS: For information only (following values are not returned by SNMP): simplex 3600 iph long edge binding duplex 3600 iph short edge binding duplex 3600 iph Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 191 US continent: 55120 TenThousandthsOfInches European continent: 140000 MicroMetres prtMediaPathType Access: read only item. The type of the media path is given: • Simplex (5) for index 1 Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 192 When the media path is jammed, the 'Critical Alerts' flag is set and the mediapath is "Unavailable because Broken" (value 19). In all other situations the mediapath is "Available and Idle" (value 0). Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 193: Prtchannelgroup

    This object returns the state of the channel, depending on the index value and if it is enabled or disabled. Mapping: • Disabled: noDataAccepted(4) • Enabled: printDataAccepted(3) prtChannelIfIndex Access: read only item. This object returns the link between the channel and the interface board. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 194 Per Channel the status can be "Available and Idle" (0) when the channel is enabled, or offline(32) when the channel is disabled. prtChannelInformation Access: read only item. This object channel contains specific information that can be used to open that channel. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 195: Prtinterpretergroup

    Entry 2: langPDF(54) prtInterpreterLangLevel Access: read only item. Entry 1: "3" Entry 2: "1.6" prtInterpreterLangVersion Access: read only item. Entries 1-6: "". prtInterpreterDescription Access: read only item. Entries 1 and 2: "Adobe Postscript 3". Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 196 Access: read only item. Entries 1 and 2: other (1) prtInterpreterTwoWay Access: read only item. Indicates whether or not this interpreter returns information back to the host. Entries 1 and 2: value no (4) Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 197: Prtconsolegroup

    Access: read only item. The string to be displayed through SNMP must be the same as the strings displayed in the message area of the console. The messages are displayed in the English language. The imagePRESS C7010VPS series information: System Status hrDeviceStatus prtConsoleDisplayBufferText...
  • Page 198 Fixed string value "Status light". prtConsoleColor Access: read only item. Return value green. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 199: Prtalerttablegroup

    The alert index starts at 1 for the first alert after a power on. Each new alert gets a new index value. The imagePRESS C7010VPS series alert information table The imagePRESS C7010VPS series common alert information table Case of alert Group...
  • Page 200 "MRE: Switch on engine" Fatal Error (MRE General subunitUnrecoverableFailure 11504) printer "Fatal Error: Switch the safety switch off and on again." Permanent Error General subunitUnrecoverableFailure printer "Permanent error: Call service" Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 201 • unknown(2) • untrained(3) • trained(4) • fieldService(5) • management(6) • noInterventionRequired(7) Each identified alert has an associated training level stored in the database. For instance, toner low has value 'trained' (4). Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 202 When a sub-unit notifies an alert, the alert group retrieves the system time as an attribute of the alert. Then the Alert group adds the new alert to one of the tables. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 203: Job Monitoring Mib

    For each instance of the queue: The minimum time in seconds that a job set entry MUST remain in the jmJobIDTable and jmJobTable before the job receives a final state. That is, the minimum time in seconds starting when the job enters the completed, cancelled or aborted state. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 204 The human readable name of this queue assigned by the system administrator (by means outside of this MIB). The human readable name of the queue should be the name of the job queue. Index 1: "Printing Queue". Index 2: "Waiting Room Queue" Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 205: Job Submission Id Group

    This value, in combination with the jmJobIDJobSetIndex value, enables the management application to obtain the job-specific objects for this job. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 206: Job Group

    • deviceStopped (0x400) • jobInterpreting (0x800) • jobPrinting (0x1000) • jobCanceledByOperator (0x4000) • abortedBySystem (0x10000) • processingToStopPoint (0x20000) • jobCompletedSuccessfully (0x80000) • jobCompletedWithWarnings (0x100000) • jobCompletedWithErrors (0x200000) • jobPaused (0x400000) • jobRetained (0x1000000) Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 207 (or has completed processing). For 'Waiting jobs queue' job set, unknown (-2) is returned. jmJobKOctetsPerCopyRequested Access: read only item. The total size in K (1024) octets of the document(s) in the job to be processed. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 208 (labels Requested and Completed) during the lifetime of the copy job or print job for the different print workflows. In this figure, N represents the final value of the requested number of pages. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 209 For jobs printed over the network, including "print from network mailbox", the job owner is derived from the job ticket or from information of the job owner, which is supplied by the job submission client. For other jobs, the job owner is "" (empty string). Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 210: Attribute Group

    It is the integer value of the attribute. jmAttributeValueAsOctets Access: read only item. It is the octet string value of the attribute. Job attribute definitions See the table below for the definitions of the Job attributes: Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 211 • Print (0x4) • Scan (0x8) • GetFile (0x40) INTEGER. Returned values: Auto-print job: getFile + print. Digital mailbox job (network->mailbox): getFile. Network mailbox print (mailbox->print engine): print. Copy job: scan + print. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 212 The number of copies of the entire job that are to be pro- ted (90) duced. INTEGER. jobCollationType The type of job collation. (97) INTEGER (jmJobCollationTypeTC). Supported values: • other(1) • unknown(2) • collated Documents(4) • uncollated Documents(5) Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 213 • other(1) • unknown(2) • stationery(3) • transparency(4) • tabStock(10) VALUE AS OCTETS (jmJobStringTC (SIZE(0..63))). Example: "A4" for 210 * 270 mm paper size. Index: (1): non-mailbox job set (2): mailbox job set Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 214: Oce Job Management Mib

    • Move job to mailbox (6) • Print job from mailbox (7) jManJobOperationParameterAsInteger Access: write item. This object contains an integer parameter value. An SNMP set operation on it triggers the operation. INTEGER32 Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 215: Billing Counters

    Billing Counters Billing Counters Billing counters The Océ Billing Counter MIB is supported on imagePRESS C7010VPS series. Access: read items. Counter Group Label A4-alike simplex b/w print Billing.print.bw printBwSimplexA4 A3-alike simplex b/w print Billing.print.bw printBwSimplexA3 A4-alike duplex b/w print Billing.print.bw...

  • Page 216: Canon Billing Counters

    Black Scan (Small) oceChargeCounterDisplayDescription / oceChargeCounterStationaryDescription Access: read only items. “” is returned. oceChargeCounterDisplayCount / oceChargeCounterStationaryCount Access: read only items. A Counter32 value is returned. The returned value contains the value of the counter. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 217: Multipliers

    (2 in short) colour multi- Used for print- multiplierColor 2000 thousand of a plier print (2 in short) Legenda: (1) = SNMP index The SNMP group for all multipliers is 'Billing.multiplier'. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 218: Print Port Monitor Mib

    The value of prtLocalizationLanguage pointed by prtGeneralCurrentLocalization. Value: “en”. ppmGeneralNumberOfPrinters Access: read-only item. See hrDeviceIndex. Value: 1. ppmGeneralNumberOfPorts Access: read-only item. The number of entries in the prtChannelGroup Value: see prtChannelGroup for a given product. Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 219: Ppmprintergroup

    The community name, which is returned, is the public community name. Value: default value is “public”. ppmPrinterSnmpQueryEnabled Access: read-only item. Indicates if the printer supports SNMP Printer MIB v2.2 and SNMP Host Resources MIB and System group of MIB v2.2. Value: true(1). Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 220: Ppmportgroup

    The port number when the prtChannelType does not have a unique well known port, otherwise 0. 0 means that the used service port is the port reserved by IANA for the concerning protocol. The protocol is implemented in a standard way. Values can be: Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 221 Specific LPD setting to indicate if the Oce LPD supports non RFC submitter ports (721-731). Value: true(1). ppmPortPrtChannelIndex Access: read-only item. See prtChannelGroup. Value: prtChannelIndex. ppmPortLprByteCountEnabled Access: read-only item. Set this value to false to prevent invalid file size issues. Value: false(2). Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...
  • Page 222 Chapter 9 - SNMP imagePRESS C7010VPS series v2.2...

  • Page 223: Jdf Interface Specification

    Chapter 10 JDF interface specification...

  • Page 224: Introduction

    Introduction Introduction Introduction This document details the JDF interface specification of PRISMAsync for: • imagePRESS C7010VPS series, release 2.2. Additional documentation • [JDF] = JDF Specification Release 1.3 Available at: http://www.cip4.org/documents/jdf_specifications/index.html File name: JDF1.3_orig.pdf Date: September 30, 2005 • [XML] = XML Specification Version 1.0 Available at: http://www.w3.org/TR/REC-xml...

  • Page 225: Xpath Notation

    • E[contains(@A = V)] The XPath specifies an element E whose attribute A has some value that contains V. • E[@A] The XPath specifies an element E in which attribute A is present. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 226: Jdf Messaging

    JDF messaging JDF messaging JMF via HTTP Not supported. JMF via hot folder Not supported. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 227: Job Submission

    PDL specification, e.g with PostScript. Such a job might be rejected by Océ products that do not support JDF or by non-Océ devices. Reference to PDL data Syntax Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 228 The "LayoutElement" must be referenced in "RunList" element. Example <JDF> <ResourcePool> <RunList> <LayoutElementRefrRef="file_1"/> </RunList> <LayoutElement ID =" file_1"> <FileSpec URL ="cid:doc@hostname.com"/> </LayoutElement> </ResourcePool> </JDF> Remark Other types of URL, e.g. HTTP, are not supported. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 229: Jdf Ticket Support

    If a setting is not available in this specification, it is ignored. If a setting or a value has a syntax which does not respect the JDF schemas, it is ignored. The attribute @SettingsPolicy is not supported. Remark Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 230 <Name="Test With Space"/> Exceptions: • max CustomerJobName = 255 • max DescriptiveName = 255 • max JobID = 63 • max DeviceID = 63 • A complete list is available in [ICS-Base] Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 231 <Orientations="Rotate90 Flip90"/> NMTOKENS 2047 Whitespace-separated list of NMTOKEN. For example: <JDF Types=”example of NMTOKENS”/> Text element 20480 Text data contained in a text element. For example: <JDF> <Comment>My text</Comment> </ JDF> Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 232: Processes

    • When you use CoverApplication for Perfect Binding jobs: Do not specify: HoleMaking, Folding, Stitching and Gathering. It is allowed to specify: Trimming • Gathering is the only process allowed to be specified more than once. For example: Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 233 A Process Node is not allowed to have a JDF child node, see [ICS-IDP]. LayoutPreparation, Imposition, Interpreting, Rendering, and DigitalPrinting must always be specified once, even if these are not used. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 234: Identification And Information

    For the following characters you need to use an escape sequence: Character Escape sequence & &amp; &apos; " &quot; < &lt; > &gt; Example <JDF> <Comment Name="Instruction">&amp;My comment&amp; Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 235 String Description When specified, the @oce:LabelName identifies the automated workflow that must be used. The label name is visible on the product UI. Recipient Name Syntax XPath: /JDF/ResourcePool/Contact[contains(@ContactTypes=”Delivery”)]/Person/@FamilyName Type String Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 236 String Supported range application/pdf application/postscript Description When specified, @MimeType defines the type of PDL data that is used for processing. The type of PDL data can be PostScript or PDF. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 237: Accounting

    Type String Supported range Any string. By default, the string is empty. Description 'AccountingCostCenter' and 'AccountingCustomInformation' must be used to specify the accounting cost center and the accounting custom information. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 238: Jdf Ticket Support: Print Settings

    @Collate="Sheet" : 1 2 3 1 2 3 1 2 3 Covers Syntax /JDF/Comment[@Name="oce:Covers"]/ Type Text element Supported range Comment[@Name="oce:Covers"] Description Front The job contains an Océ front cover Back The job contains an Océ back cover Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 239 @Sides setting /PageSize) Portrait calendar (= binding on Portrait TwoSidedFlipX top) Portrait book (= binding on Portrait TwoSidedFlipY left) Landscape calendar (= bind- Portrait TwoSidedFlipY ing on top) Landscape TwoSidedFlipX Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 240 (facing) is necessary. Sheet order specifies if the first or last sheet must be printed first. For example, this is needed when the output is deposited face up. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 241 Header up / down specifies if the sheets are delivered in the output location in the normal orientation (header up) or if the sheets are delivered in the opposite orientation (header down). Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 242: Media

    No attributes are mandatory. If job level media is not required, then the job media definition can be left empty. Page level media are specified using partitioning. Example: Media for the whole job Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 243 MediaColorNameDetails="White" Weight="80" HoleCount="0" HoleType="Explicit" MediaSetCount="1"> </Media> </ResourcePool> <ResourceLinkPool> <DigitalPrintingParamsLink rRef="res_6" Usage="Input"/> <MediaLink rRef="media_1" Usage="Input"/> </ResourceLinkPool> </JDF> Media colour Syntax for predefined colours XPath: /JDF/ResourcePool/Media/@MediaColorName Type NamedColor Supported range Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 244 @MediaColorNameDetails, attribute @MediaColorName must be left empty. Media weight Syntax XPath: /JDF/ResourcePool/Media/@Weight Type Integer Supported range Positive values with unit g/m² Description Only a positive value is decoded. Negative values are ignored. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 245 • Envelope • Aluminium • CardBoard • CD • ContinuousLong • ContinuousShort • CtPVisiblePhotoPolymer • CtPVisibleSilver • CtPThermal • DoubleWall • DVD • DryFilm • Envelope • EnvelopePlain • EnvelopeWindow Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 246 The media is considered as a tab media when @MediaTypeDetails = “PreCutTabs”. Example < Media ID = "media_1" Class="Consumable" Status="Available" DescriptiveName="My media" oce:CustomMediaType="TopColor" MediaColorNameDetails="White" Weight="80" MediaType="Paper" MediaTypeDetails="PreCutTabs" Dimension="648.0 792.0"/> Insert media type Syntax XPath: /JDF/ResourcePool/Media[@ImagableSide=”Neither”] Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 247 Description This attribute determines the number of different sheets in a set of cyclic media. Cyclic media are tab sheet, pre-printed color sheets, etc. Media dimension Syntax XPath: /JDF/ResourcePool/Media/@Dimension Type Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 248 The preferred media feed edge is determined by "GeneralID" named "oce:Orientation". The attribute "@IDValue" is a request. Required job finishing (if specified) may cause the device to use another feed edge than specified as preferred feed edge. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 249: Mark Objects

    You can select a pre-installed or a user-installed colour control strip. Pre-installed colour control strips can have names like "Fogra Media Wedge V2" or "IDEAlliance Control Strip 2009". Check the Settings Editor for available pre-installed or user-installed colour control bar names. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 250 XPath: /JDF/ResourcePool/Layout/MarkObject/JobField/@DescriptiveName Type String Supported values @DescriptiveName Description “Information bar name” Pre-installed or user-installed on controller Syntax XPath: /JDF/ResourcePool/Layout/MarkObject/DeviceMark/@MarkPosition Type Enumeration Supported values @MarkPosition Description Top edge Bottom Bottom edge Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 251 <ResourcePool> <Layout ID ="layout_1" Class ="Parameter" Status ="Available"> <MarkObject> <JobField DescriptiveName ="FOGRA Validation Print"/> <DeviceMark MarkPosition ="Right" MarkJustification ="Center"/> </MarkObject> </Layout> </ResourcePool> <ResourceLinkPool> <LayoutLink rRef ="layout_1" Usage ="Input"/> </ResourceLinkPool> </JDF> Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 252: Impositioning

    Multiple 6-up "3 3" Multiple 9-up "4 4" Multiple 16-up "X Y": X is the number of columns. Y is the number of rows. Description Multiple N-up is specified by @NumberUp. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 253 //LayoutPreparationParams/@NumberUp="2 1" or "1 2" Supported range @BindingEdge Description Left Left side binding Right Right side binding Description All these attributes must be specified with the above mentioned values to produce a booklet. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 254 @oce:SidesAfterFolding Images per page OneSidedFront Description Use attribute @oce:SidesAfterFolding only to specify a 1-sided booklet job. If the job is not a 1- sided booklet, do not use this attribute. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 255: Layout Transformation

    The X and Y lengths are specified using the following conventions: X origin is left, Y origin is bottom of the media orientation. The unit for this attribute is: point (1 point=1/72 inch). Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 256: Separation

    You can specify offset stacking on job level with attribute @OffsetDirection. Separator sheet Syntax XPath: //DigitalPrintingParams/Disjointing/InsertSheet[@SheetFormat=”Blank” and @SheetType= ”SeparatorSheet” and @SheetUsage=”Header”] Description A separator sheet is inserted before each copy of the document. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 257: Output / Finishing

    The Process index is the position of the Process in the JDF node attribute @Types, starting with zero. Example: Staple dual top <JDF ID="jdf_1" Type="Combined" Category="DigitalPrinting" Types="LayoutPreparation Imposition Interpreting Rendering DigitalPrinting Stitching"> <ResourcePool> Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 258 Stitching, HoleMaking, Folding and Glueing. Example: Double staples for the whole job except for the first four pages <JDF ID="jdf_1" Type="Combined" Category="DigitalPrinting" Types="LayoutPreparation Imposition Interpreting Rendering DigitalPrinting Stitching"> <ResourcePool> Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 259 The Punching position is specified via: /JDF/ResourceLinkPool/ComponentLink[ @Usage=”Input” and @Orientation and @CombinedProcess] Example: Punching with 2 holes <JDF Types="LayoutPreparation Imposition Interpreting Rendering DigitalPrinting HoleMaking"> <ResourcePool> <HoleMakingParams ID="res_9" HoleType="R2-generic"/> </ResourcePool> <ResourceLinkPool> <HoleMakingParamsLink rRef="res_9" Usage="Input"/> </ResourceLinkPool> Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 260 Syntax for the finishing order XPath: /JDF/ResourcePool/LayoutPreparationParams/@FinishingOrder Type Enumeration Supported range @FinishingOrder Fold method FoldGather Single sheet fold GatherFold Multi sheet fold Description With @FinishingOrder = “GatherFold” you specify the folding of several sheets. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 261 <GeneralIDIDUsage="oce:ZFoldLargeSheetsOnly"DataType="boolean" IDValue="true"/> </FoldingParams> </ResourcePool> </JDF> Remark @oce:FoldDimension For backwards compatibility, @oce:FoldDimension in the ticket is handled as follows: • Any value of @oce:FoldDimension is ignored. • @ZFoldLargeSheetsOnly is set to true. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 262 F6-7 + with the addi- (unspecified) tion of Flip180 in both Input and Output ComponentLink. @oce:ZFoldLarge- SheetsOnly ="true" Tri-fold-out with first F6-1 (unspecified) page inside Tri-fold-out with first page outside Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 263 Corner staple (default position is upper-left corner). Side Side staple (default position is left side) Saddle Saddle stitching Description Exact position of the staple can be changed with: /JDF[contains(@Types=“Stitching”)]/ResourceLinkPool/ComponentLink[ @Usage=”Input” and Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 264 (1 staple) or on the left hand side (2 staples): Double staple side positions ComponentLink/ //Media/@Dimension is Portrait //Media/@Dimension is Landscape @Orientation @Orientation not specified "Flip0" "Rotate0" "Flip90" "Rotate90" "Flip180" "Rotate180" Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 265 XPath: /JDF[contains(@Types="Stitching")]/ResourcePool/ StitchingParams[@StitchType="Saddle"]/GeneralID[@IDUsage="oce:SaddlePress"]/@IDValue Type String Supported values @IDValue Description Off (default) Saddle press not used. Saddle press used. Syntax XPath: /JDF[contains(@Types="Stitching")]/ResourcePool/ StitchingParams[@StitchType="Saddle"]/GeneralID[@IDUsage="oce:SaddlePressAdjustment"]/ @IDValue Type Integer Supported range [-10 .. 10] Description Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 266 With Height and Width you specify the dimensions of the finished book (after folding and cutting). If one-way trimming is requested, the Height parameter must not be used. If the Height Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 267 The total amount that is cut in the height direction, is 2 x oce:CutHeight. Remark oce:CutWidth and oce:CutHeight specification cannot be mixed with Width and Height specification (see previous section). Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 268 Stacker_1_StackTray LargeCapacity LargeCapacity-1 High Capacity Top Tray Stacker_2_TopTray Stacker C1 (sec- Top-2 ond stacker) StackTray Stacker_2_StackTray LargeCapacity-2 Océ HCS3 (first TopTray StackerHCS_1_TopTray stacker) Top-1 Stacker_1_TopTray StackTray StackerHCS_1_MainTray LargeCapacity LargeCapacity-1 Stacker_1_StackTray Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 269 • The finishers that are present depend on the finishing configuration. • Stackers are numbered from right to left. • The saddle finisher can have an optional Booklet Trimmer D1 and a Two-Knife Trimmer A1. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 270: Partitioning For Subset/Page Programming

    Page programming for fin- tLink/AmountPool/PartAmount/Part/ BundleItemIndex ishing According to the type of partition used, the sub-nodes must specify the attribute @RunIndex, or @Run with @Pages, or @BundleItemIndex RunIndex partitioning Syntax XPath: //<Element>[@PartIDKeys="RunIndex"]/<Element>/@RunIndex Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 271 For ranges with negative values, only one range of the kind [n ~ -m] is supported, where n>0 and m>0. All page rages with positive values are supported. Run partitioning Syntax XPath: //RunList[@PartIDKeys="Run"]/RunList/@Run Type String Syntax Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 272 Pages from this RunList partition will be part of the same BundleI- tem of the next RunList partition. Default value for all but last RunList partitions. InsertSheet with @IncludeInBundleItem="New" or "Before" MUST NOT be specified after this RunList partition. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 273 @EndOfBundleItem=”true” is defined in a RunList partition, Trailing InsertSheets after it will NOT be separated in a new BundleItem if @IncludeInBundleItem=”None”. The new BundleItem will be created just after these InsertSheets. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 274 If the run index range contains the page “0”, the jogging is not decoded for this range. The job level value will be applied. In case of jogging with Inserts, Gathering partition is allowed to be defined with BundleItemIndex instead of RunIndex. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 275 <Part RunIndex="8 ~ 11"/> </PartAmount> </AmountPool> </ComponentLink> <ComponentLink Usage="Output" rRef="res_ref" CombinedProccessIndex=”7”> <AmountPool> <PartAmount Orientation="Flip0"> <Part RunIndex=”0 ~ 3"/> </PartAmount> <PartAmount Orientation=" Flip0"> <Part RunIndex="8 ~ 11"/> </PartAmount> </AmountPool> </ComponentLink> </ResourceLinkPool> Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 276 All following Inserts with @IncludeInBundleItem ="before" must be part of this bundleItem. Jogging and Stapling can be specified explicitly for Inserts using Gathering and StichingParams partition with BundleItemIndex. NOTE BundleItemIndex must not be used when the RunIndex partition is possible. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 277: Interpreting

    Description This setting defines if overprinting should be simulated for a PDF document. The PDFInterpretingParams resource MUST not be specified if the submitted document is not a PDF document. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 278: Colour Space Conversion

    (urn:icc:None) prevents applying the default profile on un- tagged PDL objects. Untag The embedded ICC profiles in the PDL must be ignored. No ICC profile should be defined in FileSpec. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 279 Built-in ICC profiles. Profile names can be obtained from the set- tings editor and are implementation specific. urn:icc:(User defined) User defined ICC profiles added through the settings editor. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 280 One parameter of @URL or @DescriptiveName must be specified. If no ICC input profile is specified in ColorSpaceConversionOp, the PDL defaults are used. If the None input profile is specified (urn:icc:None) the PDL defaults are not used. Example Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 281 Supported values @SourceCS Description The input profile must be used for RGB colour space. CMYK The input profile MUST be used for CMYK colour space. @Operation Convert @RenderingIntent Saturation Perceptual Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 282 Any colour mapping group in the Settings Editor. Description This option defines the colour mapping group that contains mappings from either RGB, CMYK or spot colour to a different spot colour. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 283 Supported values @ProcessColorModel Description DeviceCMYK (default) Print using colours DeviceGray Print in black&white Description This parameter defines if the output must be printed in colour or in black & white. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 284: Screening

    <ScreeningParams Class ="Parameter" ID ="ScreenID" Status ="Incomplete"> <ScreenSelector ScreeningFamily ="Gradation" SourceObjects ="ImagePhotographic ImageScreenShot LineArt SmoothShades"/> <ScreenSelector ScreeningFamily ="ErrorDiffusion" SourceObjects ="Text"/> </ScreeningParams> </ResourcePool> <ResourceLinkPool> <ScreeningParamsLink rRef ="ScreenID" Usage ="Usage" CombinedProcessIndex ="index into Types for Screening"/> Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 285 <JDF Types ="... Screening ..." ... > <ResourcePool> <ScreeningParams Class ="Parameter" ID ="ScreenID" Status ="Incomplete"> <ScreenSelector ScreeningFamily ="Gradation"/> </ScreeningParams> </ResourcePool> <ResourceLinkPool> <ScreeningParamsLink rRef ="ScreenID" Usage ="Usage" CombinedProcessIndex ="index into Types for Screening"/> </ResourceLinkPool> </JDF> Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 286: Rendering

    This setting defines which printer resolution must be used. If this setting is not specified, the printer chooses the resolution. Force black overprint Syntax XPath: /JDF[contains(@Types=”Rendering”)]/ResourcePool/RenderingParams/ AutomatedOverPrintParams/@OverPrintBlackText Type Boolean Supported values @OverPrintBlackText Description False (default) Black overprint for text determined by in-PDL overprint settings. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 287 This option is available when @HonorPDFOverprint of the PDF overprint simulation is set to true. The following combination is not supported: @OverPrintBlackText=false and @OverPrintBlackLineArt=true. This combination is handled as: @OverPrintBlackText=false and @OverPrintBlackLineArt=false. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 288: Colour Correction

    Colour presets are configurations for default colour settings that are defined in the settings editor. When a colour preset is defined, the colour settings can be overridden by user-defined colour settings. When colour presets are not defined, the PDL default colour settings are used. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 289: Jdf Error Handling

    A setting value is conform to The setting / setting value is contains unsupported ele- JDF syntax but the controller ignored. ments and attributes. does not recognise or accept the setting. Example: Collate="SheetAnd- Set". Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 290: Jdf Ticket Examples

    Examples are described with the following representation. Basic JDF ticket This basic ticket gives a hint of the type of JDF tickets supported on PRISMAsync. Note that the node "AuditPool" is not mandatory. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 291 Basic JDF ticket Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 292: Page Programming

    Page programming Page programming • Eight pages 2-sided document • Red pages for covers (page programmed covers) • An insert sheet after page four. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 293: Finishing Without Attribute Bundleitemindex

    Finishing without attribute BundleItemIndex Finishing without attribute BundleItemIndex • Eight pages 2-sided document. • All sheets are punched with two holes. • Two stapled subsets. Each subset contains 2 sheets. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 294: Finishing With Attribute Bundleitemindex

    Example 1 • Two individually finished trailer InsertSheets. • One header InsertSheet finished with the following pages. Example 2 • Two individually finished trailer InsertSheets. • One individually finished header InsertSheet. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...
  • Page 295 Finishing with attribute BundleItemIndex Example 3 • Incorrect definition of 2 trailer InsertSheets, replaced by 2 header InsertSheets. Example 4 • Two adjoining RunList partitions in the same bundle. Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 296: Finishing With Attribute

    Finishing with attribute BundleItemIndex Example 5 • Two adjoining RunList partitions in different bundles Chapter 10 - JDF interface specification imagePRESS C7010VPS series v2.2...

  • Page 297: Chapter 11 Smb Printing

    Chapter 11 SMB printing...

  • Page 298: End-User Functionality

    *: Optionally, jobname can be completed by hostname indication. This depends on the Settings Editor settings. **: Depends on the submission context. Jobname is often provided when the end-user submits from Windows applications. Chapter 11 - SMB printing imagePRESS C7010VPS series v2.2...
  • Page 299 End-user functionality SMB does not allow multiple file submission. The controller receives and handles one unique job. Chapter 11 - SMB printing imagePRESS C7010VPS series v2.2...

  • Page 300: Settings Editor

    2. While the setting SMB job reception is disabled, any job, which is being spooled, is completed in the controller. The job becomes persistent and visible. 3. Any other SMB functionality remains enabled. The printer remains visible and monitoring cq management is accepted. Chapter 11 - SMB printing imagePRESS C7010VPS series v2.2...

  • Page 301: Miscellaneous

    To see the hostname of the controller in a workgroup at least one other Windows PC must belong to the same workgroup. This Windows PC has the role of Master Browser. For example, the hostname can be OCE. • Name resolution Chapter 11 - SMB printing imagePRESS C7010VPS series v2.2...
  • Page 302 • When the controller and the host PC are on separate sub-networks, the name resolution must be done by a DNS server or a WINS server. The host PC must use a DNS server for NetBIOS Name Resolution. Chapter 11 - SMB printing imagePRESS C7010VPS series v2.2...

  • Page 303: Chapter 12 Hot Folder Printing

    Chapter 12 Hot folder printing...

  • Page 304: Hot Folder

    "default_ticket.jdf". Save ticket "default_ticket.jdf" in the hot folder on the controller. The ticket is never printed. The ticket contains the defined print options except the MIME type (indicates the PDL type of the job data). Chapter 12 - Hot folder printing imagePRESS C7010VPS series v2.2...
  • Page 305 The controller needs exclusive access to the file. If an application on the host keeps the file open, the file will not be printed before the application closes the file. Solution: Do not save files directly to the hot folder from an application. Chapter 12 - Hot folder printing imagePRESS C7010VPS series v2.2...
  • Page 306 Hot folder Chapter 12 - Hot folder printing imagePRESS C7010VPS series v2.2...

  • Page 307: Scan-To-File And Scan-To-Email

    Chapter 13 Scan-to-file and scan-to-email...

  • Page 308: Scan Job Type Specification

    <fseparator> "maxnr" <fseparator> "name_nr_title" <fseparator> "cfname" { <fseparator> "subfolder" } optional { <fseparator> "postfix" } optional { <fseparator> "OrigOrientation"} optional { <fseparator> "OrigDuplex" } optional { <fseparator> "OrigKind" } optional Chapter 13 - Scan-to-file and scan-to-email imagePRESS C7010VPS series v2.2...

  • Page 309: Chapter 13

    The file format field defines which file format (PDF or TIFF) and which compression is used for the images. Format Description TIFF G31D_MH TIFF CCITT Group 3 1D modified Huffman compressed images Chapter 13 - Scan-to-file and scan-to-email imagePRESS C7010VPS series v2.2...

  • Page 310: Chapter 13

    User input dialogue syntax <namenrdialoguetitle> ::= A user-defined alphanumeric string with a maximum of 40 characters. The string can be empty. The following characters cannot be used: <CR>, <LF>, "," and ";". Chapter 13 - Scan-to-file and scan-to-email imagePRESS C7010VPS series v2.2...
  • Page 311 <OrigZoom> ::= numeric string in the range 25...400 | "", where "" means: undefined. Option <OrigZoom> defines the zoom factor in percent. This option can be overruled by the engine or by the user in a later stage. Chapter 13 - Scan-to-file and scan-to-email imagePRESS C7010VPS series v2.2...

  • Page 312: Chapter 13

    Option <DestFormat> does not define a feed direction. When <DestFormat> = "": <DestFormat> = <OrigFormat> ::= <Format> The media format for the output scan files is equal to the paper format of the originals. Chapter 13 - Scan-to-file and scan-to-email imagePRESS C7010VPS series v2.2...

  • Page 313: Chapter 14 Sra Ipds

    Chapter 14 SRA IPDS...

  • Page 314: Introduction To Sra Ipds

    Introduction to SRA IPDS Introduction The imagePRESS C7010VPS series contains SRA version 14 controller technology. The SRA print controller represents the next generation of the Océ Scalable Raster Architecture (SRA) series. This SRA technology is integrated in the PRISMAsync controller. The SRA technology adds the IPDS Page Description Language and the Adobe PDF Print Engine for Adobe PDF inside IPDS containers (licensed features) to the imagePRESS C7010VPS series.
  • Page 315 Page Definitions Resource Library System Spool Print Service Facility IPDS data stream AFP printer The data stream sent from the PSF to the AFP printer, is called Intelligent Printer Data Stream (IPDS). Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 316: Sra Ipds Settings

    The logical page size is virtually extended with the entered number of millipoints. This makes it possible to print (slightly) larger page sizes to prevent that information cannot be printed on a page. • Output recovery Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...
  • Page 317 • Rendering intent Use setting "Rendering intent" only when no render intent is defined in the data stream. • Halftone This setting defines the halftone pattern for text, graphics and images. Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...
  • Page 318 One number for each of the four stations (C, M, Y, K). Range 1..254. Not valid for the K station. Zero is reserved for K station and is not editable. NOTE Use for HLC. Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...
  • Page 319 Y, K) colour station Colour alias names 0..6 alpha-numerical names for all colour stations. NOTE The names "Gray", "Cyan", "Magenta", "Yel- low", "Black", "All", "None" are reserved for PDF and cannot be used. Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 320: Intelligent Printer Data Stream (Ipds)

    IPDS IS/3 compliant data stream in a consistent way, but the printer may reject or ignore other IPDS commands which are outside of the IS/3 set. imagePRESS C7010VPS series support this standard. Communication Communication between host and an IPDS device involves two logical parts: a carrying-protocol session and an IPDS dialogue.

  • Page 321: Ipds Command Set

    Loaded Font (FOCA) This command set contains the IPDS commands to load font infor- mation. For the following IPDS command sets, a data tower defines the data carried. The data towers are: Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 322: Device Control Command

    This data tower contains AFP objects that carry non-AFP data such as TIFF, GIF or PDF files in an AFP wrapper. Device Control command Introduction The Device Control command consists of a number of command areas. Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...
  • Page 323 No installed features reported. X’0007’ Available features No available features reported. X’0013’ Product Identifier The printer identifies itself by: • a 6 character Device Type, • a 3 character Manufacturer ID (CAJ (=Can- on)) Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...
  • Page 324 Include Data Object IPDS command. The RPO function works with the following presentation objects: • IOCA images • TIFF object containers • GIF object containers • JFIF/JPEG object containers Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...
  • Page 325 Device Control command • PDF object containers Execute Order The Canon imagePRESS C7010VPS series support the following commands: • Activate Printer Alarm, • Alternate Offset Stacker, • Discard Buffered Data, • Exception Handling Control, • Mark Form, • Request resource List, •...

  • Page 326: Text

    Text Text Introduction The Canon imagePRESS C7010VPS series support PT4 sets. The PT4 set includes PT1, PT2 and PT3 sets. The supported PTOCA text control codes Command Description Remarks Absolute Move Baseline The PRISMAsync allows positive and Absolute Move Inline negative displacement values, the new range is X’0000’...
  • Page 327 If a text related exception or a text control sequence code exception occurs, the behaviour of the printer is controlled by the Text Fidelity. See "Presentation Fidelity Control" of the Device Control command. Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 328: Im Image

    IM image IM image The Canon imagePRESS C7010VPS series support the old IM raster image format. However, this raster image format should be avoided with all new applications. The old IM raster image format is an obsolete, resolution dependent and uncompressed image format.

  • Page 329: Io Image (Ioca)

    IO image (IOCA) IO image (IOCA) Introduction The Canon imagePRESS C7010VPS series support the following IOCA function sets: • FS 10, used for monochrome bi-level images, • FS 11, used for multilevel gray or full colour images, • FS 40, tiled version of FS 10 (rarely used), •...
  • Page 330 ICC source profile or invoke an external CMR with a source profile. Other image types can only invoke a CMR. A default source profile will be used when no profile is provided. Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 331: Graphics (Goca)

    Graphics (GOCA) Graphics (GOCA) Introduction The Canon imagePRESS C7010VPS series support the complete GOCA DR/2V0 subset. Some additional GOCA functions are also supported. Line Width The GOCA line width is an integer (Set Line Width drawing order) or decimal (Set Fractional Line Width drawing order) multiplier of the normal line width.

  • Page 332: Bar Code (Bcoca)

    Bar code (BCOCA) Introduction The Canon imagePRESS C7010VPS series support the X’4E’ – Colour Specification triplet, attached to the Bar Code Data Descriptor SDF. With this triplet any of the five AFP colour spaces, RGB, CMYK, LAB, OCA or HLC can be used to specify the colour of a bar code. If a Colour Specification triplet is present, it will override any OCA colour definition in the BSD field.
  • Page 333 Since bar codes are highly dependent of resolution and technology, you should always test the BCOCA application on the actual target printer. In many cases you must adapt the application when you move it to another machine. Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 334: Object Containers

    • TIFF multiple image object • TIFF multiple image without Transparency object • PDF multi page object • PDF multi page object without Transparency • PNG image object • AFPC-TIFF object Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 335: Overlay And Page Segment

    Both Medium and Page Overlays are fully supported. Overlays can be nested at least up to five levels. Overlay rotation of 0, 90, 180 and 270 is also supported. Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 336: Fonts (Foca)

    LF3 single byte Type 1 outline fonts The fonts and their associated code pages can be downloaded from the host or be installed on the printer HD and activated through the application. Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 337: Resident Fonts

    A second requirement is that the Public/Private flag in the resource itself has been set to Public. The user can use the Private flag to prevent sensitive or confidential resources from being Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 338: Default Font

    The default font can be selected through the Settings Editor. Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 339: Additional Documentation

    Additional documentation AFP consortium approved publications The AFP consortium approved publications are published on: www.afpcinc.org/ • The direct link to the publications is: http://www.afpcinc.org/publications/ • Or go to: www.afpcinc.org/ and click 'Publications'. Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 340: Connectivity

    Connectivity Connectivity The Canon imagePRESS C7010VPS series series supports 'IPDS over TCP/IP', the proprietary protocol of IBM for IPDS network printing. The used port can be specified in the Settings Editor of the controller and is by default set to 5001. The 'IPDS over TCP/IP' protocol is specific for the IPDS PDL.

  • Page 341: Resolution

    Resolution Resolution Introduction In "Transaction printing" mode, the Canon imagePRESS C7010VPS series print with a resolution of 600 dpi. However, the data stream can contain data that has a resolution of 240, 300 and 600 dpi. NOTE A mix of resolutions in the data stream is not allowed.

  • Page 342: Print Characteristics

    Hard errors occur due to a hardware defect in the printer. In this case, the printer cannot use the internal page recovery. The job must be recovered by the host. Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 343: Paper Input Handling

    Logical tray for tray 6 Logical tray for tray 7 Logical tray for tray 8 Logical tray for special feeder Logical tray for stacker/stapler, insert tray 1 Logical tray for stacker/stapler, insert tray 2 Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...
  • Page 344 IPDS naming standard cannot be used in the tray-to-media setup. Also, media that has a device link profile attached cannot be used, because device links are not supported in transaction mode. Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 345: Paper Output Handling

    All sizes Edge stitch All edges All sizes Saddle stitch in Left edge >210x279.4 <330.2x487.7 Centre-fold-in Left edge >210x279.4 <330.2x487.7 Trim after centre Left edge >210x279.4 fold or saddle <330.2x487.7 stitch (2) Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...
  • Page 346 4. Jogging is not controlled via an X'85' triplet. The jogging functionality is only supported for specific output tray ids, see the table above. Jogging can be set on a sheet level. Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 347: Introduction To Fonts

    An outline font is a software typeface that can generate a scalable range of font sizes. IBM AFP Font Structure A font in the IBM AFP environment has three components: • Coded font • Character set • Code page Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...
  • Page 348 IDs in the code page must be included in that character set. Code pages accommodate various national languages by using characters and special symbols appropriate to the language. Code pages can be single-byte (SBCS) or double-byte (DBCS). Bar code Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...
  • Page 349 Introduction to fonts Standard bar code fonts, and additional US postnet and UK RM4SCC bar codes, are supported. Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 350: Fonts Handling

    The factory installed fonts and code pages cannot be deleted or modified. You can also install additional outline fonts or code pages; the installation is described in paragraph 'Install resources on the printer'. Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...
  • Page 351 You can also use the GUI to delete resources which have been captured directly from the host. The factory installed resources, fonts, code pages, are protected and cannot be deleted. Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 352: Colour Mapping Tables

    You must also use the Settings Editor to delete resources which have been captured directly from the host. The factory installed resources, fonts and code pages are protected and cannot be deleted. Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 353: Colour Management In Ipds Mode

    Colour flow charts The overall colour flow chart for transaction mode: The output data determines which of the following colour flow charts must be used: • PDF CMM • AFP CMM Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 354: Not Supported Ipds Topics

    • Device links • Proofing, proofing is the simulation of the colour gamut • PDF output intent • PDF spot colour tables, alternative colours specified in the PDF files are used Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 355: Differences Between Tp And Dp Colour Management

    • Do Black preservation. • Define colour numbering for highlight colours (process colours CMY only). • Define colour names for indexed colours (colour mix of CMYK). • Select PDF to all black. Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 356: Differences Between Tp And Dp Colour Management

    Differences between TP and DP colour management Chapter 14 - SRA IPDS imagePRESS C7010VPS series v2.2...

  • Page 357: Index

    Device parameters..........58 jmJobStateReasons1........206 Duplex..............66 jmJobSubmissionID........205 jmJobTable.............206 jmNumberOfInterveningJobs.......206 Jog................69 EBNF grammar.............138 Error recovery............28 LP................31 lp and lpr command line options......37 Filename Format...........141, architecture............32 Fold................67 imagePRESS C7010VPS series v2.2...
  • Page 358 Oce Job Management MIB prtConsoleLocalization........173 jManJobOperationParameterAsInteger..214 prtConsoleNumberOfDisplayChars....173 jManJobOperationTypeIndex.......214 prtConsoleNumberOfDisplaylines....173 jmGeneralJobSetIndex........214 prtConsoleOffTime.........197 jmJobIndex.............214 prtConsoleOnTime.........197 Options for lp/lpr command line......37 prtCoverDescription........176 Output type.............80 prtCoverStatus..........176 prtCoverTable..........176 prtDeviceRefIndex..........178 prtDeviceRefSeqNumber.......178 Pagedevice prtGeneralConfigChanges......173 BeginPage............61 prtGeneralCurrentLocalization......173 EndPage............61 prtGeneralCurrentOperator......173 Overview............92 prtGeneralGroup..........173 imagePRESS C7010VPS series v2.2...
  • Page 359 Printer status prtMarkerCounterUnit........188 reading..............39 prtMarkerDefaultIndex........173 printerlpd..............31 prtMarkerEastMargin........188 Printing multiple copies prtMarkerGroup..........188 with LPD............38 imagePRESS C7010VPS series v2.2...
  • Page 360 Storage group HR MIB hrMemorySize..........166 hrStorage group..........166 hrStorageAllocationFailures......166 hrStorageAllocationUnits......166 hrStorageDescr..........166 hrStorageIndex..........166 hrStorageSize..........166 hrStorageTable..........166 hrStorageType..........166 hrStorageUsed..........166 Subsets..............87 System administrator..........41 System group HR MIB hrSystemDate..........164 hrSystemInitialLoadDevice......164 hrSystemInitialLoadParameters....164 hrSystemMaxProcesses........164 hrSystemNumUsers........164 hrSystemProcesses........164 hrSystemUpTime...........164 System group MIB-II sysContact............160 sysDescr............160 sysLocation.............160 sysName............160 imagePRESS C7010VPS series v2.2...
  • Page 362 Beyond the Ordinary Printing for Professionals Creating global leadership in printing Canon and Océ have joined forces to create the global leader in the printing industries. Our customers can choose from one of the industry's broadest range of products backed by best-in-class service and support organisations.

Table of Contents