Fonts (FOCA)
captured. Resources which have already been captured on the printer hard disk will not be used if
the Font/Resource capture option on the printer GUI has been set to off. If you want to capture
additional resources, or use the resources already on the printer hard disk, make sure that the
capture box in the printer GUI below is checked.
Default font
The factory installed default font is a Courier Roman Medium 12 pitch (10 point) font. You can
select another default font and code page among the factory or user installed single byte fonts
and code pages on the hard disk. The default font can be selected through the Settings Editor.
338
Chapter 14 - SRA IPDS
imagePRESS C7010VPS series v2.2