Océ imagePRESS C7010VPS series Technical Manual page 22

Media selection
Tab-inclusive en-
abled
Tab-inclusive dis-
abled
For the imagePRESS C7010VPS series, the insert sheet attribute is an independent attribute that
can be set for all media, including tab media. Therefore, tab media is sent via the bypass if the
insert sheet attribute is true.
Media insert sheet
Each media type has a media insert sheet attribute. When the insert sheet attribute is true, the
media type is handled as a non-process sheet via the bypass.
Media cycle length
Each media type has a media cycle length attribute. The cycle length is an integer between 0 and
999. The default cycle length is 1, except for tab media. For tab media, the cycle length is 0.
The cycle length attribute is used for error recovery and for flushing left-over sheets at the end of
a set.
For example:
• A tab media has a tab bank of 10. The cycle length for this tab media is 10.
• A set of three insert sheets, where each insert sheet has a different colour, has a cycle length of
3.
Default media selection
When the media size is specified, this size is used to determine the size of the physical paper on
which pages of the document are printed.
In case of value "As in document", the media size is not specified. Then the PDL size is used to
determine the physical paper size of the required media.
By default, the sheet alignment is set to 'centre' for both directions.
If the PDL size is larger then the media size, the image is clipped in a way that is specified by the
alignment setting.
If the media size is larger then the PDL size, no scaling on the image is applied by default.
In case of same-up and booklet, images larger than the media size are scaled down to fit the
media. Images smaller than the media size are not scaled up.
In case of n-up, the images are scaled to fit the document size.
In case of same-up and booklet, the image is positioned with respect to individual page cells.
For n-up, the image is positioned with respect to the whole sheet.
22 Chapter 2 - PRISMAsync
Sheet size & bit‐ Tab caption
map size
Tab width inclu- Tab caption can
ded. be added, typical-
Custom size or ly by the applica-
imagePRESS tion.
C7010VPS series
default size A4
tab or Letter tab.
Sheet and bitmap n.a.
have the same
size.
Both are rectan-
gular.
Host Printer
Tab caption can The optional tab
be added. caption is printed
on the tab.
n.a. Print the bitmap
on the sheet as
specified.
imagePRESS C7010VPS series v2.2