Océ imagePRESS C7010VPS series Technical Manual page 185

Each Output can have either the state "Full" (value 16) or "Available and Idle" (value 0).
Unit
StackerStaplerAJ Up-
per Tray
StackerStaplerAJ
Lower Tray
StackerStaplerAJ Sad-
dle Tray
StackerC1 1 Stack
Tray
StackerC1 1 Top Tray
StackerC1 2 Stack
Tray
StackerC1 2 Top Tray
PerfectBinderB1 Tray
prtOutputName
Access: read only item.
The name assigned to this output tray.
• StackerStaplerAJ Saddle Tray
• StackerC1 1 Stack Tray
• StackerC1 1 Top Tray
• StackerStaplerAJ Upper Tray
• StackerStaplerAJ Lower Tray
• StackerC1 2 Stack Tray
• StackerC1 2 Top Tray
• PerfectBinderB1 Tray
prtOutputVendorName
Access: read only item.
The string "Oce" is returned if the output device is made by Océ, and "unknown" if the output
device is an OEM or brandless output device.
prtOutputModel
Access: read only item.
The string "" is returned.
prtOutputVersion
Access: read only item.
The string "" is returned.
prtOutputSerialNumber
Access: read only item.
imagePRESS C7010VPS series v2.2
Value
0 (idle) or 16 (full)
0 (idle) or 16 (full)
0 (idle) or 16 (full)
0 (idle) or 16 (full)
0 (idle) or 16 (full)
0 (idle) or 16 (full)
0 (idle) or 16 (full)
0 (idle) or 16 (full)
prtOutputGroup
Chapter 9 - SNMP 185