Snmp User Table - Océ imagePRESS C7010VPS series Technical Manual

SNMP User table

SNMP User table
SNMPv1/v2c community names
• Océ Read/Write Community name: <community name>.
This community name is intended for Océ SNMP applications and is editable on the controller
side and on applications side. Default value is "oce_operator". (Only present if the SNMP
enable switch is set.)
• Océ Read Community name: <community name>.
This community name is intended for Océ drivers using SNMP. It is editable on the controller
side and on the driver side. Default value is "oce_read". (Only present if the SNMP enable
switch is set.)
• Read Community name: <community name>.
This community name is intended for Third party SNMP applications and legacy applications. It
is editable on the controller side. Default value is "public" (Only present if the SNMP enable
switch is set.)
SNMPv3 users
Purpose
Read only user
Read/Write user, e.g. Océ In-
traLogic
Custom User
SNMP configuration via Settings Editor
Purpose
Enable/Disable SNMP
Enable/Disable Job Monitoring and
Management
Community name: <community
name>
Océ Read/Write Community name:
<community name>
154 Chapter 9 - SNMP
User name
@Oce_V3-read
@Oce_V3-admin
<username>
Define in the Settings Editor
Reboot required
Yes
Yes
No
No
MIB view
MIB-II, HR MIB, Printer MIB,
Job MIB in read only mode.
MIB-II, HR MIB, Printer MIB,
Job MIB in read / write mode.
MIB-II, HR MIB, Printer MIB,
Job MIB in read only mode.
Description
-
-
This community name is intended
for Third-party SNMP applications
and legacy applications. It is editable
on the controller side. Default value
is "public". (Only present if the SNMP
enable switch is set)
This community name is intended
for Océ drivers using SNMP. It is ed-
itable on the controller side and on
the driver side. Default value is
"oce_read". (Only present if the
SNMP enable switch is set.)
imagePRESS C7010VPS series v2.2
4